problem when compile 2.5.70-mm8

problem when compile 2.5.70-mm8

Post by jds » Thu, 12 Jun 2003 19:50:14



Hi:

   I try the compile kernel 2.5.70-mm8 and recive this messages:


  CHK     include/linux/version.h
  UPD     include/linux/version.h
  Making asm->asm-i386 symlink
  CC      scripts/empty.o
  MKELF   scripts/elfconfig.h
  HOSTCC  scripts/file2alias.o
  HOSTCC  scripts/modpost.o
  HOSTLD  scripts/modpost
  SPLIT   include/linux/autoconf.h -> include/config/*
  CC      arch/i386/kernel/asm-offsets.s
  CHK     include/asm-i386/asm_offsets.h
  UPD     include/asm-i386/asm_offsets.h
  Starting the build. KBUILD_BUILTIN=1 KBUILD_MODULES=
  CC      init/main.o
  CHK     include/linux/compile.h
  UPD     include/linux/compile.h
  CC      init/version.o
  CC      init/do_mounts.o
  CC      init/do_mounts_rd.o
  CC      init/do_mounts_initrd.o
  LD      init/mounts.o
  CC      init/initramfs.o
  LD      init/built-in.o
  HOSTCC  usr/gen_init_cpio
  CPIO    usr/initramfs_data.cpio
  GZIP    usr/initramfs_data.cpio.gz
  LD      usr/initramfs_data.o
  LD      usr/built-in.o
  CC      arch/i386/kernel/process.o
  CC      arch/i386/kernel/semaphore.o
  CC      arch/i386/kernel/signal.o
  AS      arch/i386/kernel/entry.o
  CC      arch/i386/kernel/traps.o
  CC      arch/i386/kernel/irq.o
  CC      arch/i386/kernel/vm86.o
  CC      arch/i386/kernel/ptrace.o
  CC      arch/i386/kernel/i8259.o
  CC      arch/i386/kernel/ioport.o
  CC      arch/i386/kernel/ldt.o
  CC      arch/i386/kernel/setup.o
arch/i386/kernel/setup.c: In function `setup_early_printk':
arch/i386/kernel/setup.c:919: invalid lvalue in unary `&'
make[1]: *** [arch/i386/kernel/setup.o] Error 1
make: *** [arch/i386/kernel] Error 2

  Help me please;

  Regards.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

 
 
 

problem when compile 2.5.70-mm8

Post by jds » Thu, 12 Jun 2003 21:10:09


Hi Thomas:

   Applied the patchs and my kernel is compile OK.

   Thanks....:)

   Muchas Gracias.

---------- Original Message -----------


Sent: Wed, 11 Jun 2003 20:02:48 +0200
Subject: Re: problem when compile 2.5.70-mm8


> > Hi:

> >    I try the compile kernel 2.5.70-mm8 and recive this messages:
>   ~~ snip ~~
> >   CC      arch/i386/kernel/setup.o
> > arch/i386/kernel/setup.c: In function `setup_early_printk':
> > arch/i386/kernel/setup.c:919: invalid lvalue in unary `&'
> > make[1]: *** [arch/i386/kernel/setup.o] Error 1
> > make: *** [arch/i386/kernel] Error 2

> >   Help me please;

> >   Regards.

> As posted before the attached patch helps.

> If you do not want to use the EARLY_PRINTK feature at all but are
> too lazy to turn it off in the Kernel debug menu explicitly (as I am,
>  too ;-) you may also use the second attached patch wich corrects
> dependencies in Kconf.

> Best regards
>    Thomas Schlichter

------- End of Original Message -------

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

 
 
 

1. [2.5.70][ANNOUNCE] kexec for 2.5.70 available

A patch set for kexec for 2.5.70 is now available. This patch set is
based upon the stable 2.5.{67,68,69} versions of kexec. The most recent
set of kexec patches do not yet patch cleanly into 2.5.70.

This patch was tested to work on a dual-proc P4-1.7GHz Xeon system. The
only known strangeness I have observed (YMMV) is that the VESA
framebuffer driver did not reinitialize correctly after kexec-ing a new
kernel, but the system rebooted correctly.

The stable patches for 2.5.70 are available for download from OSDL's
patch life-cycle manager (PLM ) in pieces, or as a single unified patch.

More info here:
http://www.osdl.org/archive/andyp/bloom/Code/Linux/Kexec/index.html

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

2. InterViews

3. 2.5.70 and 2.5.70-mm3 hang on bootup

4. funky characters during rlogin's

5. RTC causes hard lockups in 2.5.70-mm8

6. Hard disk being used up.!

7. Kernel crash dumps with 2.5.70-mm8

8. /var/adm/messages

9. 2.5.70-mm8 and the 3com NIC driver

10. 2.5.70-mm8

11. 2.5.70-mm8: freeze after starting X

12. 2.5.70-mm8 with contest

13. ALSA Segmentation fault load modules 2.5.70 and 2.5.70mm1