Checksum problem: 2.4.19-pre3 w/ 3COM Card + Wrong card model

Checksum problem: 2.4.19-pre3 w/ 3COM Card + Wrong card model

Post by Shawn Star » Fri, 26 Jul 2002 16:20:04



The error below comes from enabling ERPOM boot on the network card. When this
is disabled the Checksum error goes away.

3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
02:05.0: 3Com PCI 3c982 Dual Port Server Cyclone at 0xa400. Vers LK1.1.16
 ***INVALID CHECKSUM 002f*** <6>Linux agpgart interface v0.99 (c) Jeff
Hartmann

This model is the wrong detected card.

It should be the 3C980C-TXM 10/100

Shawn.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

 
 
 

1. Promise 20267 hangs with 2.4.19-pre3 and 2.4.19-pre3-ac3

With 2.4.18 everything works fine:

  Mar 13 13:56:13 athlon kernel: PDC20267: IDE controller on PCI bus 00 dev 48
  Mar 13 13:56:13 athlon kernel: PDC20267: chipset revision 2
  Mar 13 13:56:13 athlon kernel: PDC20267: not 100%% native mode: will probe irqs later
  Mar 13 13:56:13 athlon kernel: PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
  Mar 13 13:56:13 athlon kernel:     ide2: BM-DMA at 0x1800-0x1807, BIOS settings: hde:pio, hdf:pio
  Mar 13 13:56:13 athlon kernel:     ide3: BM-DMA at 0x1808-0x180f, BIOS settings: hdg:pio, hdh:pio

  Mar 13 13:56:13 athlon kernel: hde: Maxtor 4G120J6, ATA DISK drive
  Mar 13 13:56:13 athlon kernel: hdf: Maxtor 4G160J8, ATA DISK drive
  Mar 13 13:56:13 athlon kernel: hdg: TOSHIBA CD-ROM XM-6602B, ATAPI CD/DVD-ROM drive

  Mar 13 13:56:14 athlon kernel: hde: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=238216/16/63, UDMA(100)
  Mar 13 13:56:14 athlon kernel: hdf: 268435455 sectors (137439 MB) w/2048KiB Cache, CHS=266305/16/63, UDMA(100)

  Mar 13 13:56:14 athlon kernel: Partition check:
  Mar 13 13:56:14 athlon kernel:  hde: hde1 hde2 hde3 hde4
  Mar 13 13:56:14 athlon kernel:  hdf: hdf1

With 2.4.19-pre3 and pre3-ac3 the disk type and size are reported correctly
but the systems hangs at the partition check (I couldn't find a copy of the log on
the disk so I edited the above to match what I remembered on the screen):

  Mar 13 13:56:13 athlon kernel: hde: Maxtor 4G120J6, ATA DISK drive
  Mar 13 13:56:14 athlon kernel: hde: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=238216/16/63, UDMA(100)
  Mar 13 13:56:14 athlon kernel: Partition check:
  Mar 13 13:56:14 athlon kernel:  hde:

I tried the experiental ide timeout workaround and that does print a timeout message
after a few seconds but the system still hangs there.

Its a Tyan 2462 athlon SMP with real SMP CPUs. There is another disk and a cdrom on
this controller but due to cable lengths I can't switch things around.

I am willing to try any patch or suggestion...

Andrew

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

2. Linux Printer

3. 2.4.19-pre3 kernel freeze (SMP broken between pre2 and pre3?)

4. How to get time diff with accuracy < 10ms ?

5. 2.4.19-pre3 IDE-problem

6. inn cnfs and soft-updates

7. NFS problem after 2.4.19-pre3, not solved

8. File Sharing on Dual Boot

9. 2.4.19-rc2 -> 2.4.19-rc3 : no more eth (fwd)

10. 3Ware ok 2.4.19, dies 2.4.19-ac4

11. 2.4.19-pre6aa1 (possible all kernel after 2.4.19-pre2) athlon PCI workaround

12. Kernel panic 2.4.19-pre6 AND 2.4.19-pre5-ac3 - More info - ksymoops

13. kbuild25 version 3.0 for 2.4.19-pre9 and 2.4.19-pre9-ac3