[2.5.65] kexec for 2.5.65 available

[2.5.65] kexec for 2.5.65 available

Post by Andy Pfiffe » Thu, 20 Mar 2003 00:10:16



Eric,

I have a patch set available for kexec for 2.5.65.  I have checked it on
a 2-way system and it worked as expected.  There were no changes
required, and the previous version of kexec-tools worked without
modification.

The patches are available for download from OSDL's patch lifecycle
manager ( http://www.osdl.org/cgi-bin/plm/ ).

Patch stack for kexec for 2.5.65:

        kexec base for 2.5.65:
        http://www.osdl.org/cgi-bin/plm?module=patch_info&patch_id=1702

        kexec hwfixes for 2.5.65:
        http://www.osdl.org/cgi-bin/plm?module=patch_info&patch_id=1703

        kexec usemm change (allowed 2-way to work for me):
        http://www.osdl.org/cgi-bin/plm?module=patch_info&patch_id=1704

        optional change to defconfig (sets CONFIG_KEXEC=y):
        http://www.osdl.org/cgi-bin/plm?module=patch_info&patch_id=1705

The patches are also available (with matching kexec-tools-1.8) from this
link pending a crontab update:
http://www.osdl.org/archive/andyp/kexec/2.5.65/

Regards,
Andy

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

 
 
 

1. ide kernel panic: 2.5.64-ac3 2.5.65-ac1 2.5.65-mm4

AMD K6/2 with VIA chipset has this panic at boot:

Kernel panic: ide: default attach failed

Panic on 2.5.64-ac3, 2.5.65-ac[13], 2.5.65-mm4, 2.5.65-bk4.

No panic on 2.5.61-ac1, 2.5.65-mm3, 2.5.65, 2.4.21-pre5, 2.4.21-pre5-ac3.

No modules.

egrep '^C.*IDE|^C.*VIA' /usr/src/linux-2.5.65-ac1/.config
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDE_MODES=y

Boot message on 2.5.65-ac1:

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c586b (rev 47) IDE UDMA33 controller on pci00:07.1
    ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 51536U3, ATA DISK drive
hdb: ATAPI CDROM, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: Maxtor 52049U4, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 30015216 sectors (15368 MB) w/2048KiB Cache, CHS=29777/16/63, UDMA(33)
 hda: [PTBL] [1868/255/63] hda1 hda2 hda3
hdc: host protected area => 1
hdc: 40020624 sectors (20491 MB) w/2048KiB Cache, CHS=39703/16/63, UDMA(33)
 hdc: hdc1 hdc2 hdc3
ide-disk: hdc: Failed to register the driver with ide.c
ide-default: hdc: Failed to register the driver with ide.c
Kernel panic: ide: default attach failed

lspci -vvv for IDE interface

IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at e000 [size=16]

lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev 04)
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 47)
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
00:07.3 Host bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10)
00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C (rev 10)
01:00.0 VGA compatible controller: nVidia Corporation NV6 [Vanta] (rev 15)

--
Randy Hron
http://home.earthlink.net/~rwhron/kernel/bigbox.html

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

2. restrict a deamon to local netowrk

3. Some Warning from gcc-3.4-cvs for 2.5.65

4. X server for matrox millenium

5. 2.5.65: 3C905 driver doesn't work.

6. No space left on device (but there are free inodes and blocks!!)

7. fix pppoatm compile in 2.5.65

8. web camera support for linux?

9. 2.5.65 RCU oops.

10. conntrack related slab corruption in 2.5.65

11. Issues in 2.5.65-ac4

12. Yet more i2c driver changes for 2.5.65

13. Linux 2.5.65-ac2