2.2.18: difficulties with Ensoniq 5880 (es1371) rev 0x03?

2.2.18: difficulties with Ensoniq 5880 (es1371) rev 0x03?

Post by Matthias Andre » Wed, 28 Feb 2001 07:10:03



I already asked this on the linux-sound mailing list almost 10 days ago,
but got no response. So here it is again, header cut down to essentials:

-----
Date:   Sat, 17 Feb 2001 12:04:32 +0100


Subject: 2.2.18: difficulties with Ensoniq 5880 (es1371) rev 0x03?

Hi,

I'm having strange happenings with various Gigabyte boards and Linux
2.2.18 here. Short story: 7ZXR with Ens 5880 rev 02 has sound, 7XR with
Ens 5880 rev 03 does not have sound.

I bought a Gigabyte 7ZXR in December which has a

00:0e.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
        Subsystem: Giga-byte Technology: Unknown device a000
        Flags: bus master, slow devsel, latency 64, IRQ 12
        I/O ports at c800
        Capabilities: [dc] Power Management version 1
(this one shares the IRQ with a 53c875 on a Tekram DC390U)

 es1371: stereo enhancement: SigmaTel SS3D
 es1371: version v0.22 time 13:30:09 Jan 24 2001
 es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02
 es1371: found es1371 rev 2 at io 0xc800 irq 12
 es1371: features: joystick 0x200
 es1371: codec vendor   v (0x838476) revision 8 (0x08)
 es1371: codec features 18bit DAC 18bit ADC
 es1371: stereo enhancement: SigmaTel SS3D

Now, at University, we bought some 7ZX in February which have a (mind
the revision)

00:0e.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 03)
        Subsystem: Giga-byte Technology: Unknown device a000
        Flags: bus master, slow devsel, latency 64, IRQ 10
        I/O ports at d000
        Capabilities: [dc] Power Management version 2
(this one does not share its IRQ)

 es1371: version v0.22 time 21:01:40 Feb  5 2001
 es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x03
 es1371: found es1371 rev 3 at io 0xd000 irq 10
 es1371: features: joystick 0x0
 es1371: codec vendor     (0x000000) revision 0 (0x00)
 es1371: codec features none
 es1371: stereo enhancement: no 3D stereo enhancement

What's going on with the new 7ZX boards with rev 0x03? They don't show a
codec, and don't make any sound. Is this a known problem? Is there a
solution?

--
Matthias Andree
-
To unsubscribe from this list: send the line "unsubscribe linux-sound" in

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

 
 
 

1. es1371 driver: ensoniq 5880 distortion

i have an sb card that uses a 5880. all output from the card is distorted,
regardless of which output i use, what volume i set the card at, and what i
play (cat english.au and xmms playing mp3s).

does anyone else have this problem?

--

DSA Key ID 0xE6CB97DA
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

2. WANTED: phone # for LongShine

3. Sound Blaster 16 PCI\Ensoniq 5880

4. Easy way to migrate boot disk?

5. Ensoniq 5880 AudioPCI

6. Sparc 630s using Viking Chips

7. Ensoniq 5880 - digital audio output - how?

8. iproute2 + multigateway and wrong src address for gateways

9. Ooops on 2.2.18...

10. 2.2.18-modules belonging?

11. Enabling Firewall on Redhat 9 (with 2.2.18) ?

12. Mixing UDMA33/66 drives, VIA IDE, Linux 2.2.18

13. PROBLEM: DHCP doesn't work in 2.2.18?