2.5.70-mm3

2.5.70-mm3

Post by Andrew Morto » Sun, 01 Jun 2003 10:40:11



ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.70/...

. More ext3 fixes.  It seems fully recovered now.

. Some cleanups and enhancements to the O_SYNC rework.

. A couple of fairly significant reiserfs enhancements.  See the changelogs
  in the individual patches for details.

Changes since 2.5.70-mm2:

-coda-typo-fix.patch
-sysenter-nmi-fix-2.patch
-pccardd-suspend-fix.patch
-resume-oops-fix.patch
-export-mmu_cr4_features.patch
-visws-irq-update.patch
-zoran_procfs-copy-user-fix.patch
-irq_balance-fix-2.patch
-i2o-leak-comment.patch
-write_one_page-cleanup.patch
-unlink-speedup-speedup.patch
-remove-fcntl-check.patch
-unregister_netdev-cleanup.patch
-64-bit-pci_alloc_consistent.patch
-svcsock-use-after-free-fix.patch
-writev-retval-fix.patch
-isdn-typo-fix.patch

 Merged

-slabinfo-rework.patch

 Dropped for now, so slab-magazine-layer.patch gets standalone testing.

+reiserfs-parser-fix-remount.patch

 Reiserfs mount option parsing enhancements

+reiserfs-small-blocksize.patch

 Support smaler blocksizes in reiserfs

+raid-fixes.patch
+neilb-raid1-double-free-fix.patch

 Might fix raid crashes

+mtd-build-fix.patch

 Compile fix

+hugetlbfs-mount-options.patch

 Allow hugetlbfs to be mouted with different uid/gid/umask

-jbd-560-transaction-leak-fix.patch

 Folded into other things

+jbd-580-log_start_commit-race-fix.patch

 Tighten locking

+ext3-035-journal_try_to_free_buffers-race-fix.patch
+ext3-040-recursive-ext3_write_inode-check.patch
+ext3-050-ioctl-transaction-leak.patch
+ext3-070-xattr-clone-leak-fix.patch

 ext3 fixes

-O_SYNC-speedup.patch
+O_SYNC-speedup-2.patch

 Reworked quite a bit.  Now the IO submit happens outside i_sem as well as
 the waiting.

+sysv-sem-16-bit-pif-fix.patch

 sysv sem fix for >32k pids

+remove-LINUX_2_2.patch

 Cleanup

All 144 patches:

linus.patch

mm.patch
  add -mmN to EXTRAVERSION

kgdb-ga.patch
  kgdb stub for ia32 (George Anzinger's one)

kmalloc_percpu-interface-change.patch
  kmalloc_percpu: interface change.

kmalloc_percpu-interface-change-warning-fix.patch
  nail a warning

DEFINE_PERCPU-in-modules.patch
  per-cpu support inside modules (minimal)

slab-magazine-layer.patch
  magazine layer for slab

aio-random-cleanups.patch

config_spinline.patch
  uninline spinlocks for profiling accuracy.

ppc64-ioctl-pci-update.patch
  From: Anton Blanchard <an...@samba.org>
  Subject: ppc64 stuff

ppc64-reloc_hide.patch

sym-do-160.patch
  make the SYM driver do 160 MB/sec

irqreturn-snd-via-fix.patch
  via sound irqreturn fix

irq_cpustat-cleanup.patch
  irq_cpustat cleanup

config-PAGE_OFFSET.patch
  Configurable kenrel/user memory split

irq-check-rate-limit.patch
  IRQs: handle bad return values from handlers

irq_desc-others.patch
  Fix up irq_desc initialisation for non-ia32

common-ioctl32.patch
  From: Pavel Machek <pa...@suse.cz>
  Subject: Re: must-fix list, v5

ioctl32-cleanup-sparc64.patch
  ioctl32 cleanup: sparc64

ioctl32-cleanup-x86_64.patch
  ioctl32 cleanup: sparc64

lru_cache_add-check.patch
  lru_cache_add debug check

fb-image-depth-fix.patch
  fbdev image depth fix

reiserfs-parser-fix-remount.patch
  reiserfs option parser fix and ability to pass options to remount

reiserfs-small-blocksize.patch
  reiserfs support for blocksizes other than 4096 bytes

raid-fixes.patch
  gix RAID things

neilb-raid1-double-free-fix.patch
  raid1 double-free fix

mtd-build-fix.patch
  MTD build fix

buffer-debug.patch
  buffer.c debugging

hugetlbfs-mount-options.patch
  hugetlbfs: mount options and permissions

VM_RESERVED-check.patch
  VM_RESERVED check

rcu-stats.patch
  RCU statistics reporting

ide_setting_sem-fix.patch

reslabify-pgds-and-pmds.patch
  re-slabify i386 pgd's and pmd's

raid5-use-right-dev-fix.patch
  raid5 fix

linux-isp.patch

isp-update-1.patch

list_del-debug.patch
  list_del debug check

airo-schedule-fix.patch
  airo.c: don't sleep in atomic regions

synaptics-mouse-support.patch
  Add Synaptics touchpad tweaking to psmouse driver

deadline-hash-removal-fix.patch
  DEADLINE: hash removal fix

resurrect-batch_requests.patch
  bring back the batch_requests function

kblockd.patch
  Create `kblockd' workqueue

cfq-infrastructure.patch

elevator-completion-api.patch
  elevator completion API

as-iosched.patch
  anticipatory I/O scheduler

as-proc-read-write.patch
  AS: pgbench improvement

as-discrete-read-fifo-batches.patch
  AS: discrete read fifo batches

as-sync-async.patch
  AS sync/async batches

as-hash-removal-fix.patch
  AS: hash removal fix

as-jumbo-patch-for-scsi.patch
  AS jumbo patch (for SCSI and TCQ)

unplug-use-kblockd.patch
  Use kblockd for running request queues

cfq-2.patch
  CFQ scheduler, #2
  CFQ: update to rq-dyn API

cfq-hash-removal-fix.patch
  CFQ: hash removal fix

per-queue-nr_requests.patch
  per queue nr_requests

blk-invert-watermarks.patch
  blk_congestion_wait threshold cleanup

unmap-page-debugging.patch
  unmap unused pages for debugging

CONFIG_DEBUG_PAGEALLOC-extras.patch
  From: Manfred Spraul <manf...@colorfullife.com>
  Subject: DEBUG_PAGEALLOC

print-build-options-on-oops.patch
  print a few config options on oops

fremap-all-mappings.patch
  Make all executable mappings be nonlinear

sound-irq-hack.patch

show_task-free-stack-fix.patch
  show_task() fix and cleanup

put_task_struct-debug.patch

ia32-mknod64.patch
  mknod64 for ia32

ext2-64-bit-special-inodes.patch
  ext2: support for 64-bit device nodes

ext3-64-bit-special-inodes.patch
  ext3: support for 64-bit device nodes

64-bit-dev_t-kdev_t.patch
  64-bit dev_t and kdev_t

oops-dump-preceding-code.patch
  i386 oops output: dump preceding code

lockmeter.patch

time-interpolation-infrastructure.patch
  improved core support for time-interpolation

thread-info-in-task_struct.patch
  allow thread_info to be allocated as part of task_struct

reinstate-task-freeing-hack-for-ia64.patch
  reinstate lame task_struct (non)-refcounting hack/fix

ext3-no-bkl.patch

journal_get_write_access-speedup.patch

ext3-concurrent-block-inode-allocation.patch
  Subject: [PATCH] concurrent block/inode allocation for EXT3

ext3-orlov-approx-counter-fix.patch
  Fix orlov allocator boundary case

ext3-concurrent-block-allocation-fix-1.patch

ext3-concurrent-block-allocation-hashed.patch
  Subject: Re: [PATCH] concurrent block/inode allocation for EXT3

ext3-concurrent-block-inode-allocation-fix.patch
  fix ext3 inode allocator race

jbd-010-b_committed_data-race-fix.patch
  Subject: Re: [Ext2-devel] [RFC] probably bug in current ext3/jbd

jbd-020-locking-schema.patch
  plan JBD locking schema

jbd-030-remove-splice_lock.patch
  remove jh_splice_lock

jbd-040-journal_add_journal_head-locking.patch
  fine-grain journal_add_journal_head locking

jbd-045-rename-journal_unlock_journal_head.patch
  rename journal_unlock_journal_head to journal_put_journal_head

jbd-050-b_frozen_data-locking.patch
  Finish protection of journal_head.b_frozen_data

jbd-060-b_committed_data-locking.patch

jbd-070-b_transaction-locking.patch
  implement b_transaction locking rules

jbd-080-b_next_transaction-locking.patch
  Implement b_next_transaction locking rules

jbd-090-b_tnext-locking.patch
  b_tnext locking

jbd-100-remove-journal_datalist_lock.patch
  remove journal_datalist_lock

jbd-110-t_nr_buffers-locking.patch
  t_nr_buffers locking

jbd-120-t_updates-locking.patch
  t_updates locking

jbd-130-t_outstanding_credits-locking.patch
  implement t_outstanding_credits locking

jbd-140-t_jcb-locking.patch
  implement t_jcb locking

jbd-150-j_barrier_count-locking.patch
  implement j_barrier_count locking

jbd-160-j_running_transaction-locking.patch
  implement j_running_transaction locking

jbd-170-j_committing_transaction-locking.patch
  implement j_committing_transaction locking

jbd-180-j_checkpoint_transactions.patch
  implement j_checkpoint_transactions locking

jbd-190-j_head-locking.patch
  implement journal->j_head locking

jbd-200-j_tail-locking.patch
  implement journal->j_tail locking

jbd-210-j_free-locking.patch
  implement journal->j_free locking

jbd-220-j_commit_sequence-locking.patch
  implement journal->j_commit_sequence locking

jbd-230-j_commit_request-locking.patch
  implement j_commit_request locking

jbd-240-dual-revoke-tables.patch
  implement dual revoke tables.

jbd-250-remove-sleep_on.patch
  remove remaining sleep_on()s

jbd-300-remove-lock_kernel-journal_c.patch
  remove lock_kernel() calls from journal.c

jbd-310-remove-lock_kernel-transaction_c.patch
  remove lock_kernel calls from transaction.c

jbd-400-remove-lock_journal-checkpoint_c.patch
  remove lock_journal calls from checkpoint.c

jbd-410-remove-lock_journal-commit_c.patch
  remove lock_journal() from commit.c

jbd-420-remove-lock_journal-journal_c.patch
  remove lock_journal() calls from journal.c

jbd-430-remove-lock_journal-transaction_c.patch
  remove lock_journal() calls from transaction.c
  transaction leak and race fix

jbd-440-remove-lock_journal.patch
  remove lock_journal()

jbd-510-h_credits-fix.patch
  journal_release_buffer: handle credits fix

jbd-520-journal_unmap_buffer-race.patch
  journal_unmap_buffer race fix

jbd-530-walk_page_buffers-race-fix.patch
  ext3_writepage race fix

jbd-540-journal_try_to_free_buffers-race-fix.patch
  buffer freeing non-race comment

jbd-550-locking-checks.patch
  add some locking assertions

jbd-570-transaction-state-locking.patch
  additional transaction shutdown locking

jbd-580-log_start_commit-race-fix.patch
  fix log_start_commit race

ext3-010-fix-journalled-data.patch
  Remove incorrect assertion from ext3

ext3-020-journal_dirty_metadata-speedup.patch

ext3-035-journal_try_to_free_buffers-race-fix.patch

ext3-040-recursive-ext3_write_inode-check.patch
  ext3: add a dump_stack()

ext3-050-ioctl-transaction-leak.patch
  ext3: fix error-path handle leak

ext3-070-xattr-clone-leak-fix.patch
  Fix leak in ext3_acl_chmod()

invalidate_mmap_range.patch
  Interface to invalidate regions of mmaps

aio-01-retry.patch ...

read more »

 
 
 

2.5.70-mm3

Post by Adrian Bun » Sun, 01 Jun 2003 16:00:16


It seems the following compile error when trying to compile sdla,c
statically into the kernel comes from Linus' tree:

<--  snip  -->

...
  CC      drivers/net/wan/sdla.o
drivers/net/wan/sdla.c: In function `sdla_cmd':
drivers/net/wan/sdla.c:443: warning: comparison of distinct pointer
types lacks a cast
drivers/net/wan/sdla.c: In function `exit_sdla':
drivers/net/wan/sdla.c:1685: `sdla0' undeclared (first use in this
function)
drivers/net/wan/sdla.c:1685: (Each undeclared identifier is reported
only once
drivers/net/wan/sdla.c:1685: for each function it appears in.)
make[3]: *** [drivers/net/wan/sdla.o] Error 1

<--  snip  -->

I'm not sure whether the following is the best solution but it fixes the
problem:

--- linux-2.5.70-mm3/drivers/net/wan/sdla.c.old 2003-05-31 15:49:52.000000000 +0200

        return 0;
 }

-#ifdef MODULE
 static struct net_device sdla0 = {
        .name = "sdla0",
        .init = sdla_init
 };
-#endif /* MODULE */

 static int __init init_sdla(void)
 {

cu
Adrian

--

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

 
 
 

2.5.70-mm3

Post by Christoph Hellwi » Sun, 01 Jun 2003 16:10:12



> It seems the following compile error when trying to compile sdla,c
> statically into the kernel comes from Linus' tree:

Argg, #ifdef MODULE considered harmful..

Quote:> I'm not sure whether the following is the best solution but it fixes the
> problem:

The right fix would be to make exit_sdla and module_exit #ifdef MODULE.
I'll cook up a patch once I have access to a source tree again (=monday)
unless you're faster :)

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

 
 
 

2.5.70-mm3

Post by Sean Neakum » Sun, 01 Jun 2003 16:20:12


On booting 2.5.70-mm3, only one of the six logical volumes in my
volume group is activated.  2.5.70 works fine.  dmesg and .config
appended below.

--- begin dmesg output:
Linux version 2.5.70-mm3 (sneakums@zoot-boot) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 SMP Sat May 31 12:09:03 IST 2003
Video mode to be used for restore is 122
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
 BIOS-e820: 000000007fff0000 - 000000007fff8000 (ACPI data)
 BIOS-e820: 000000007fff8000 - 0000000080000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fb110
hm, page 000fb000 reserved twice.
hm, page 000fc000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f6000 reserved twice.
On node 0 totalpages: 524272
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 225280 pages, LIFO batch:16
  HighMem zone: 294896 pages, LIFO batch:16
Intel MultiProcessor Specification v1.1
    Virtual Wire compatibility mode.
OEM ID: VIA      Product ID: VT3075       APIC at: 0xFEE00000
Processor #0 6:11 APIC version 17
Processor #1 6:11 APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Processors: 2
Building zonelist for node : 0
Kernel command line: auto BOOT_IMAGE=Linux ro root=801 noirqbalance
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 1129.617 MHz processor.
Console: colour VGA+ 100x30
Calibrating delay loop... 2220.03 BogoMIPS
Memory: 2071788k/2097088k available (1655k kernel code, 24152k reserved, 954k data, 144k init, 1179584k highmem)
Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel(R) Pentium(R) III CPU family      1133MHz stepping 01
per-CPU timeslice cutoff: 1463.46 usecs.
task migration cache decay timeout: 2 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000004
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 2252.80 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Pentium(R) III CPU family      1133MHz stepping 01
Total of 2 processors activated (4472.83 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00178011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:  
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 001 01  0    0    0   0   0    1    1    51
 06 001 01  0    0    0   0   0    1    1    59
 07 001 01  0    0    0   0   0    1    1    61
 08 001 01  0    0    0   0   0    1    1    69
 09 001 01  1    1    0   1   0    1    1    71
 0a 001 01  1    1    0   1   0    1    1    79
 0b 001 01  1    1    0   1   0    1    1    81
 0c 001 01  0    0    0   0   0    1    1    89
 0d 001 01  0    0    0   0   0    1    1    91
 0e 001 01  0    0    0   0   0    1    1    99
 0f 001 01  0    0    0   0   0    1    1    A1
 10 000 00  1    0    0   0   0    0    0    00
 11 000 00  1    0    0   0   0    0    0    00
 12 000 00  1    0    0   0   0    0    0    00
 13 000 00  1    0    0   0   0    0    0    00
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 080 00  1    0    0   0   0    0    2    40
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1129.0282 MHz.
..... host bus clock speed is 132.0856 MHz.
checking TSC synchronization across 2 CPUs: passed.
Starting migration thread for cpu 0
Bringing up 1
CPU 1 IS NOW UP!
Starting migration thread for cpu 1
CPUS done 32
mtrr: v2.0 (20020519)
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
PCI: Using configuration type 1
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec pool[0]:   1 bvecs: 256 entries (12 bytes)
biovec pool[1]:   4 bvecs: 256 entries (48 bytes)
biovec pool[2]:  16 bvecs: 256 entries (192 bytes)
biovec pool[3]:  64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
IA-32 Microcode Update Driver: v1.11 <tig...@veritas.com>
Enabling SEP on CPU 1
Enabling SEP on CPU 0
highmem bounce pool size: 64 pages
Journalled Block Device driver loaded
PCI: Enabling Via external APIC routing
pty: 256 Unix98 ptys configured
lp: driver loaded but no devices found
Real Time Clock Driver v1.11
Linux agpgart interface v0.100 (c) Dave Jones
[drm] Initialized radeon 1.8.0 20020828 on minor 0
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (polling).
parport_pc: Via 686A parallel port: io=0x378
anticipatory scheduling elevator
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
anticipatory scheduling elevator
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <s...@saw.sw.com.sg> and others
eth0: OEM i82557/i82558 10/100 Ethernet, xx:xx:xx:xx:xx:xx, IRQ 10.
  Board assembly a08922-002, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
eth1: OEM i82557/i82558 10/100 Ethernet, xx:xx:xx:xx:xx:xx, IRQ 9.
  Board assembly a08922-002, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.35
        <Adaptec 19160B Ultra160 SCSI adapter>
        aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

anticipatory scheduling elevator
(scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
  Vendor: SEAGATE   Model: ST336607LW        Rev: 0004
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled.  Depth 253
anticipatory scheduling elevator
anticipatory scheduling elevator
anticipatory scheduling elevator
anticipatory scheduling elevator
anticipatory scheduling elevator
anticipatory scheduling elevator
anticipatory scheduling elevator
anticipatory scheduling elevator
anticipatory scheduling elevator
anticipatory scheduling elevator
anticipatory scheduling elevator
anticipatory scheduling elevator
anticipatory scheduling elevator
anticipatory scheduling elevator
SCSI device sda: 71687372 512-byte hdwr sectors (36704 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
mice: PS/2 mouse device common for all mice
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
device-mapper: 1.0.6-ioctl (2002-10-15) initialised: d...@uk.sistina.com
Via 686a audio driver 1.9.1 ...

read more »

 
 
 

2.5.70-mm3

Post by Christophe Saou » Sun, 01 Jun 2003 16:20:15


Am Sam, 2003-05-31 um 16.09 schrieb Sean Neakums:

Quote:> On booting 2.5.70-mm3, only one of the six logical volumes in my
> volume group is activated.  2.5.70 works fine.  dmesg and .config
> appended below.

You need to recompile libdevmapper against the new kernel headers. The
kdev_t size has changed and unfortunately the old ioctl interface
exposed this limited one to the userspace.

--

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

 
 
 

2.5.70-mm3

Post by Sean Neakum » Sun, 01 Jun 2003 17:10:06



> Am Sam, 2003-05-31 um 16.09 schrieb Sean Neakums:

>> On booting 2.5.70-mm3, only one of the six logical volumes in my
>> volume group is activated.  2.5.70 works fine.  dmesg and .config
>> appended below.

> You need to recompile libdevmapper against the new kernel headers. The
> kdev_t size has changed and unfortunately the old ioctl interface
> exposed this limited one to the userspace.

Aha.

The 64-bit device number patch reverses cleanly, so I think I'll just
build without it and try again.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

 
 
 

2.5.70-mm3

Post by Sean Neakum » Sun, 01 Jun 2003 17:20:08




>> You need to recompile libdevmapper against the new kernel headers. The
>> kdev_t size has changed and unfortunately the old ioctl interface
>> exposed this limited one to the userspace.

> Aha.

> The 64-bit device number patch reverses cleanly, so I think I'll just
> build without it and try again.

Okay, that did it.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

 
 
 

2.5.70-mm3

Post by Adrian Bun » Sun, 01 Jun 2003 23:10:07


It seems the following compile error comes from Linus' tree:

<--  snip  -->

...
  LD      drivers/built-in.o
drivers/usb/gadget/built-in.o(.text+0x2d00): In function
`net2280_set_fifo_mode':
: multiple definition of `net2280_set_fifo_mode'
drivers/usb/built-in.o(.text+0xb9460): first defined here
drivers/usb/gadget/built-in.o(.text+0x6040): In function
`usb_gadget_get_string':
: multiple definition of `usb_gadget_get_string'
drivers/usb/built-in.o(.text+0xbc7a0): first defined here
drivers/usb/gadget/built-in.o(.text+0x32c0): In function
`usb_gadget_register_driver':
: multiple definition of `usb_gadget_register_driver'
drivers/usb/built-in.o(.text+0xb9a20): first defined here
drivers/usb/gadget/built-in.o(.text+0x3620): In function
`usb_gadget_unregister_driver':
: multiple definition of `usb_gadget_unregister_driver'
drivers/usb/built-in.o(.text+0xb9d80): first defined here
make[1]: *** [drivers/built-in.o] Error 1

<--  snip  -->

The following patch fixes it (drivers/usb/Makefile now includes gadget/
entries):

--- linux-2.5.70-mm3/drivers/Makefile.old       2003-05-31 23:00:25.000000000 +0200

 obj-$(CONFIG_PARIDE)           += block/paride/
 obj-$(CONFIG_TC)               += tc/
 obj-$(CONFIG_USB)              += usb/
-obj-$(CONFIG_USB_GADGET)       += usb/gadget/
 obj-$(CONFIG_INPUT)            += input/
 obj-$(CONFIG_GAMEPORT)         += input/gameport/
 obj-$(CONFIG_SERIO)            += input/serio/

cu
Adrian

--

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

 
 
 

2.5.70-mm3

Post by zip.. » Sun, 01 Jun 2003 23:50:09


>On Sat, 31 May 2003, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.70/...

I get following OOPS when I try to load snd-ymfpci ALSA module:

---cut
Unable to handle kernel paging request at virtual address 00004205
 printing eip:
f0c02106
*pde = 00000000
Oops: 0002 [#1]
PREEMPT
CPU:    0
EIP:    0060:[<f0c02106>]    Not tainted VLI
EFLAGS: 00010286
EIP is at +0x106/0x7a0 [snd_ymfpci]
eax: ee832b60   ebx: 000041ed   ecx: 00000388   edx: c0348380
esi: 00000800   edi: 00000000   ebp: efed6400   esp: ea2dde84
ds: 007b   es: 007b   ss: 0068
Process modprobe (pid: 3250, threadinfo=ea2dc000 task=ed9ab330)
Stack: c0348380 00000388 00000004 f0c42da6 c0167c7d effe7ba0 000000d0 effd8300

       f0c42e40 ea2d0e00 eb7e0200 000041ed 00000000 03881adf f0c45540 ffffffed

       efed6400 00000000 c01e6452 efed6400 f0c0358c efed6400 f0c45540 f0c45540

Call Trace:
 [<f0c42da6>] +0x7/0x2a1 [snd_ymfpci]
 [<c0167c7d>] alloc_inode+0x14d/0x160
 [<f0c42e40>] +0xa1/0x2a1 [snd_ymfpci]
 [<f0c45540>] driver+0x0/0xa0 [snd_ymfpci]
 [<c01e6452>] pci_device_probe_static+0x52/0x70
 [<f0c0358c>] +0x8c/0xe0 [snd_ymfpci]
 [<f0c45540>] driver+0x0/0xa0 [snd_ymfpci]
 [<f0c45540>] driver+0x0/0xa0 [snd_ymfpci]
 [<c01e65bc>] __pci_device_probe+0x3c/0x50
 [<f0c45540>] driver+0x0/0xa0 [snd_ymfpci]
 [<c01e6623>] pci_device_probe+0x53/0x60
 [<f0c45540>] driver+0x0/0xa0 [snd_ymfpci]
 [<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
 [<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
 [<c0226815>] bus_match+0x45/0x80
 [<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
 [<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
 [<c022693c>] driver_attach+0x5c/0x60
 [<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
 [<c0226bd3>] bus_add_driver+0x93/0xb0
 [<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
 [<f0c42e47>] +0xa8/0x2a1 [snd_ymfpci]
 [<f0c45540>] driver+0x0/0xa0 [snd_ymfpci]
 [<f0c455d8>] driver+0x98/0xa0 [snd_ymfpci]
 [<c022703f>] driver_register+0x2f/0x40
 [<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
 [<c01e6870>] pci_register_driver+0x70/0xa0
 [<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
 [<f0c4b900>] +0x0/0x140 [snd_ymfpci]
 [<f0c027b7>] alsa_card_ymfpci_init+0x17/0x60 [snd_ymfpci]
 [<f0c45540>] driver+0x0/0xa0 [snd_ymfpci]
 [<f0c4b900>] +0x0/0x140 [snd_ymfpci]
 [<c013163c>] sys_init_module+0x12c/0x240
 [<f0c4b900>] +0x0/0x140 [snd_ymfpci]
 [<c01091cb>] syscall_call+0x7/0xb

Code: f0 85 c0 78 35 8b 5c 24 2c c7 44 24 0c a6 2d c4 f0 c7 44 24 08 04 00
00 00 89 44 24 04 c7 04 24 80 83 34 c0 e8 cc e5 51 cf 85 c0 <89> 43 18 0f
85 6e 04 00 00 8b 15 40 bd c4 f0 8b 04 95 20 55 c4
---cut

If the driver is build-in I get similar OOPS before init is started.
I also got something similar on some earlier -mm kernels, but 2.5.69-mm7
works fine.

My .config:
---cut
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_EMBEDDED is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_025GB is not set
# CONFIG_05GB is not set
CONFIG_1GB=y
# CONFIG_2GB is not set
# CONFIG_3GB is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set

#
# ACPI Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_HT_ONLY is not set
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
CONFIG_APM_CPU_IDLE=y
CONFIG_APM_DISPLAY_BLANK=y
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_HOTPLUG is not set

#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_NAMES=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
CONFIG_PNPBIOS=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set

#
# ATA/ATAPI/MFM/RLL device support
#
CONFIG_IDE=y

#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_GENERIC is not set
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_PCI_WIP=y
CONFIG_IDEDMA_NEW_DRIVE_LISTINGS=y
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_IDEDMA_AUTO=y
CONFIG_IDEDMA_IVB=y
CONFIG_BLK_DEV_IDE_MODES=y

#
# SCSI device support
#
# CONFIG_SCSI is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#

#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_INET_ECN=y
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
CONFIG_IP_NF_FTP=y
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
# CONFIG_IP_NF_MATCH_MAC is not set
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
# CONFIG_IP_NF_MATCH_MARK is not set
CONFIG_IP_NF_MATCH_MULTIPORT=y
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_ECN is not set ...

read more »

 
 
 

2.5.70-mm3

Post by Jordan Breedin » Mon, 02 Jun 2003 00:10:07


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

  I have some good new and some bad news about 2.5.70-mm3.


  The reiserfs changes seem to be stable, I have been running this
kernel on an all reiserfs box since this morning and everything seems
completely fine with it.


  Somewhere in the changes brought in from Linus BK (I assume since
there were USB changes there, but none that I noticed in your changes),
all my USB keyboard LEDs stopped working.  Numlock and capslock still
seem to function correctly but the LEDs on the keyboard no longer work,
with 2.5.70-mm2 they worked on VTs and in X, with 2.5.70-mm3 they don't
work on either.

Jordan


> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.70/...

> . More ext3 fixes.  It seems fully recovered now.

> . Some cleanups and enhancements to the O_SYNC rework.

> . A couple of fairly significant reiserfs enhancements.  See the changelogs
>   in the individual patches for detail
> <snipped>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQE+2SZ9SigNyqq/SRwRAuNRAJ41zmOyRsBSAhfZgEnvtdEEvCM3lgCgnGuZ
awd9bdIuzRipIrQBM+sAvH8=
=rDoY
-----END PGP SIGNATURE-----

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

 
 
 

2.5.70-mm3

Post by Adrian Bun » Mon, 02 Jun 2003 00:20:09




> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.70/...

> I get following OOPS when I try to load snd-ymfpci ALSA module:
>...

Debian bug #193077 [1] lists a similar problem with current ALSA and
kernel 2.4 ...

cu
Adrian

[1] http://bugs.debian.org/193077

--

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

 
 
 

1. 2.5.70 and 2.5.70-mm3 hang on bootup

Both 2.5.70 and 2.5.70-mm3 hang right after "Ok, booting the kernel..." on
one of my test boxes (at the point, nothing works, not even turning on/off
the NumLock LED).

Hardware: ASUS A7S333, Athlon 2600+, 1 GB RAM
Compiler: gcc 3.3

Haven't had the time to debug this yet (and probably won't have the time
for a couple more days, busy with work ATM); any ideas?

LLaP
bero
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

2. Novell Cluster/SAN login problem

3. [2.5.70][ANNOUNCE] kexec for 2.5.70 available

4. Mandrake users: Don't try this at home!

5. 2.5.70-mm3 with contest

6. New Server Admin

7. software suspend in 2.5.70-mm3.

8. Amanda

9. About 2.5.70-mm3

10. 2.5.70-mm3 - Oops and hang

11. capacity in 2.5.70-mm3

12. 2.5.70-mm3: ioctl32-cleanup-ppc64

13. Some oddities from 2.5.67 to 2.5.70-mm3