Board index Linux Kernel

2.4.19-pre3 IDE-problem

2.4.19-pre3 IDE-problem

Post by jarau.. » Thu, 14 Mar 2002 02:00:16



Hi all

on my Supermicro Serverworks board
with ide-scsi emulation 2.4.19-pre3 hangs
when accessing the IDE-ZIP drive (at Serverworks IDE)
(2.4.18 with the IDE is OK)

Although I configured DMA for disks only
I get
ide_dmaproc: chipset supported ide_dma_lostirq func only: 13
hdd: lost interrupt  (that is a new ATA 133 Maxtor disk at a Promise IDE
controler)

Serverworks OSB4 in impossible state
Disable UDMA ....

(I have already applied the bluesmoke patch posted)

Thanks for looking into it

Helmut Jarausch

Lehrstuhl fuer Numerische Mathematik
Institute of Technology, RWTH Aachen
D 52056 Aachen, Germany

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

 
 
 
Top

1. Promise 20267 hangs with 2.4.19-pre3 and 2.4.19-pre3-ac3

With 2.4.18 everything works fine:

  Mar 13 13:56:13 athlon kernel: PDC20267: IDE controller on PCI bus 00 dev 48
  Mar 13 13:56:13 athlon kernel: PDC20267: chipset revision 2
  Mar 13 13:56:13 athlon kernel: PDC20267: not 100%% native mode: will probe irqs later
  Mar 13 13:56:13 athlon kernel: PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
  Mar 13 13:56:13 athlon kernel:     ide2: BM-DMA at 0x1800-0x1807, BIOS settings: hde:pio, hdf:pio
  Mar 13 13:56:13 athlon kernel:     ide3: BM-DMA at 0x1808-0x180f, BIOS settings: hdg:pio, hdh:pio

  Mar 13 13:56:13 athlon kernel: hde: Maxtor 4G120J6, ATA DISK drive
  Mar 13 13:56:13 athlon kernel: hdf: Maxtor 4G160J8, ATA DISK drive
  Mar 13 13:56:13 athlon kernel: hdg: TOSHIBA CD-ROM XM-6602B, ATAPI CD/DVD-ROM drive

  Mar 13 13:56:14 athlon kernel: hde: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=238216/16/63, UDMA(100)
  Mar 13 13:56:14 athlon kernel: hdf: 268435455 sectors (137439 MB) w/2048KiB Cache, CHS=266305/16/63, UDMA(100)

  Mar 13 13:56:14 athlon kernel: Partition check:
  Mar 13 13:56:14 athlon kernel:  hde: hde1 hde2 hde3 hde4
  Mar 13 13:56:14 athlon kernel:  hdf: hdf1

With 2.4.19-pre3 and pre3-ac3 the disk type and size are reported correctly
but the systems hangs at the partition check (I couldn't find a copy of the log on
the disk so I edited the above to match what I remembered on the screen):

  Mar 13 13:56:13 athlon kernel: hde: Maxtor 4G120J6, ATA DISK drive
  Mar 13 13:56:14 athlon kernel: hde: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=238216/16/63, UDMA(100)
  Mar 13 13:56:14 athlon kernel: Partition check:
  Mar 13 13:56:14 athlon kernel:  hde:

I tried the experiental ide timeout workaround and that does print a timeout message
after a few seconds but the system still hangs there.

Its a Tyan 2462 athlon SMP with real SMP CPUs. There is another disk and a cdrom on
this controller but due to cable lengths I can't switch things around.

I am willing to try any patch or suggestion...

Andrew

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

2. Anyone here compile/use SEQ on FreeBSD

3. 2.4.19-pre3 kernel freeze (SMP broken between pre2 and pre3?)

4. netscape crashes

5. drivers/ide/qd65xx: no cli/sti (2.4.19-pre3 & 2.5.28)

6. Splitting up string into different variables

7. ide-cd oops in 2.4.19-pre3-ac5

8. use of variables in ed

9. 2.4.19-pre3 udma ide hang with heavy disk activity

10. OOPS: ide-cd, 2.4.19-pre3-ac5

11. IDE Panic (2.4.19-pre3-ac3)

12. sis 5591 ide in 2.4.19-pre3 consumes souls

13. 2.4.19-pre4 IDE-problem


All times are UTC
Board index