Very Computer

by **Take Vo** » Wed, 23 Oct 2002 11:00:12

Hello,

I'm just doing my part in getting the new kernel stable

kernel: linux-2.5.43
hardware:DELL Inspiron 8100
mouse: Logitech USB Optical Mouse
config:
CONFIG_INPUT_MOUSEDEV
CONFIG_INPUT_EVDEV
CONFIG_SERIO
CONFIG_SERIO_I8042
CONFIG_INPUT_MOUSE
CONFIG_MOUSE_PS2
CONFIG_USB
CONFIG_USB_HID
CONFIG_USB_HIDINPUT

/dev/input/mice and /dev/input/mouse0 exist and are used for my internal PS/2
mouse.

dmesg shows that USB mouse exists, and also shows insert and removes
correctly.

However no /dev/input/mouse1 apears nor do events for this mouse apear on
/dev/input/mice.

Thanks,
Take

--

GnuPG: 2A5C110609995A378302A27630C962CCFD54AA85
http://binary-magic.com/~takev/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

by **Brad Hard** » Wed, 23 Oct 2002 11:20:08

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

> Hello,

> I'm just doing my part in getting the new kernel stable

Functional would help too!

Quote:> kernel: linux-2.5.43
> hardware:DELL Inspiron 8100
> mouse: Logitech USB Optical Mouse
> config:
> CONFIG_INPUT_MOUSEDEV
> CONFIG_INPUT_EVDEV
> CONFIG_SERIO
> CONFIG_SERIO_I8042
> CONFIG_INPUT_MOUSE
> CONFIG_MOUSE_PS2
> CONFIG_USB
> CONFIG_USB_HID
> CONFIG_USB_HIDINPUT

Can you show us /proc/bus/usb/devices?
And also /proc/bus/input/devices?

Brad

- --
http://linux.conf.au. 22-25Jan2003. Perth, Aust. I'm registered. Are you?
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iD8DBQE9tRW2W6pHgIdAuOMRAtj2AKCIo9LTjXJBFzy1+4d4ogxT1yhy3gCfesLQ
DNbsvFVxrZKt+3PfNZcK94g=
=eOQd
-----END PGP SIGNATURE-----

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

by **bert huber** » Wed, 23 Oct 2002 11:40:12

> kernel: linux-2.5.43
> cardmgr: 3.2.1
> hardware:DELL Inspiron 8100
> config: CONFIG_PCMCIA
> CONFIG_CARDUBS
> CONFIG_BLK_DEV_IDECS

> killing the cardmgr hangs the kernel,

How hard? Does numlock still work? Can you tell if the CPU is busy
afterwards (ie, your laptop remains hot).

Regards,

bert

--
http://www.PowerDNS.com Versatile DNS Software & Services
http://lartc.org Linux Advanced Routing & Traffic Control HOWTO
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

by **Take Vo** » Wed, 23 Oct 2002 12:00:16

Hello bert,

Quote:> > kernel: linux-2.5.43
> > cardmgr: 3.2.1
> > hardware:DELL Inspiron 8100
> > config: CONFIG_PCMCIA
> > CONFIG_CARDUBS
> > CONFIG_BLK_DEV_IDECS

> > killing the cardmgr hangs the kernel,

> How hard? Does numlock still work? Can you tell if the CPU is busy
> afterwards (ie, your laptop remains hot)

I did find out that it only happens when my compact flash card is insurted.
Without it I can do a kill of the cardmgr.

I haven't checked numlock. But I can't switch consoles with alt+f?.

I'll do some more test this evening in the hotel.

--

GnuPG: 2A5C110609995A378302A27630C962CCFD54AA85
http://binary-magic.com/~takev/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

by **Take Vo** » Wed, 23 Oct 2002 12:00:15

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello Brad,

Quote:> > kernel: linux-2.5.43
> > hardware:DELL Inspiron 8100
> > mouse: Logitech USB Optical Mouse
> > config:
> > CONFIG_INPUT_MOUSEDEV
> > CONFIG_INPUT_EVDEV
> > CONFIG_SERIO
> > CONFIG_SERIO_I8042
> > CONFIG_INPUT_MOUSE
> > CONFIG_MOUSE_PS2
> > CONFIG_USB
> > CONFIG_USB_HID
> > CONFIG_USB_HIDINPUT

> Can you show us /proc/bus/usb/devices?

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.05
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c00c Rev= 6.20
S: Manufacturer=Logitech
S: Product=USB Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms

Quote:> And also /proc/bus/input/devices?

I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Generic Mouse"
P: Phys=isa0060/serio1/input0
H: Handlers=mouse0 event0
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3

I: Bus=0011 Vendor=0001 Product=0002 Version=ab02
N: Name="AT Set 2 keyboard"
P: Phys=isa0060/serio0/input0
H: Handlers=kbd event1
B: EV=120003
B: KEY=4 2000000 8061f9 fbc9d621 efdfffdf ffefffff ffffffff fffffffe
B: LED=7

- --

GnuPG: 2A5C110609995A378302A27630C962CCFD54AA85
http://binary-magic.com/~takev/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (GNU/Linux)

iD8DBQE9tR7pMMlizP1UqoURAjfaAKCPkAirhn/ktnGbLsFCpcYhbj/LVwCcDxsD
qGZjZjERntKcms3L6K4guww=
=SVA6
-----END PGP SIGNATURE-----

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

by **Brad Hard** » Wed, 23 Oct 2002 12:20:06

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
> D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=046d ProdID=c00c Rev= 6.20
> S: Manufacturer=Logitech
> S: Product=USB Mouse
> C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=(none)
> E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms

So it looks like you don't have a driver for the mouse loaded (should be hid).
Can you check this in driverfs? (You used to be able to do this in
/proc/bus/usb/drivers, but the maintainer knew better :-{)
If you did this as modules, lsmod would be good to know too.

Also, there is a problem with 2.5.43, in that the core driver model stuff got
screwed up. That caused problem if you turned on the usb test framework
driver, and some other issues. Here is a simple patch that David Brownell
did:
http://marc.theaimsgroup.com/?l=linux-usb-devel&m=103457053803353&w=2

I'm not sure about 2.5.44 - you could try that too?

Brad

- --
http://linux.conf.au. 22-25Jan2003. Perth, Aust. I'm registered. Are you?
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iD8DBQE9tSJ4W6pHgIdAuOMRAiCXAJ91Ytj7yQTE/pe6gQJjmVhKtl+2FACfQR3H
TANHmIIlvFR25uJF7scrSBA=
=N3g0
-----END PGP SIGNATURE-----

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

by **Take Vo** » Wed, 23 Oct 2002 13:30:10

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

Quote:> > kernel: linux-2.5.43
> > cardmgr: 3.2.1
> > hardware:DELL Inspiron 8100
> > config: CONFIG_PCMCIA
> > CONFIG_CARDUBS
> > CONFIG_BLK_DEV_IDECS

> > killing the cardmgr hangs the kernel,

removing the flashcard from the pcmcia slot also hangs the kernel.
So it seams a flashcard issue (I had issues with this card in the early 2.4.x
kernels, but it would hang the kernel at insertion)

Quote:> How hard? Does numlock still work? Can you tell if the CPU is busy
> afterwards (ie, your laptop remains hot).

numlock doesn't work.
CPU gets hot (fans start after a minute).

Thanks
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (GNU/Linux)

iD8DBQE9tTLrMMlizP1UqoURAvXaAJ9MmPl54/qrQKwAdccoe91Q+Of8YwCgp7yP
h4pA8QC95P0+HSaUa3iGuUw=
=6QXb
-----END PGP SIGNATURE-----

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

by **Take Vo** » Wed, 23 Oct 2002 13:40:12

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello Brad

Sorry I think I forgot to press the "reply to all" button :-)

> > > > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
> > > > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> > > > P: Vendor=046d ProdID=c00c Rev= 6.20
> > > > S: Manufacturer=Logitech
> > > > S: Product=USB Mouse
> > > > C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
> > > > I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=(none)
> > > > E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms
> > > So it looks like you don't have a driver for the mouse loaded (should
> > > be hid).
> > Yes, I compared it with the 2.4.19 output, which has the Driver=hid
> > thing. I have enabled the HID (full HID) and HID input layer in the
> > kernel
> Looks OK.
> > > Can you check this in driverfs? (You used to be able to do this in
> > > /proc/bus/usb/drivers, but the maintainer knew better :-{)
> > /devices/bus/usb/drivers
> > total 0
> > drwxr-xr-x 2 root root 0 Oct 22 12:43 generic
> > drwxr-xr-x 2 root root 0 Oct 22 12:43 hid
> > drwxr-xr-x 2 root root 0 Oct 22 12:43 hub
> > drwxr-xr-x 2 root root 0 Oct 22 12:43 usb-storage
> > drwxr-xr-x 2 root root 0 Oct 22 12:43 usbfs
> > drwxr-xr-x 2 root root 0 Oct 22 12:43 usblp
> > drwxr-xr-x 2 root root 0 Oct 22 12:43 usbscanner

> > The hid directory is empty, but so are the other, I don't know how
> > driverfs works yet.
> That is OK.
> > > Also, there is a problem with 2.5.43, in that the core driver model
> > > stuff got screwed up. That caused problem if you turned on the usb test
> > > framework driver, and some other issues. Here is a simple patch that
> > > David Brownell did:
> > Well, I have had USB testing driver off.
> May turn up other problems too. Did you try the patch?

Not yet, is it in the 2.5.44 sources, because I am now trying to install that.

Take
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (GNU/Linux)

iD8DBQE9tTZmMMlizP1UqoURAqDiAJ9McfNNZWBE/UmZdzgnXxhfQYliwACfevCf
t802qfMW0XGc5JytDmrh3TM=
=pY6z
-----END PGP SIGNATURE-----

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

by **Alan Co** » Wed, 23 Oct 2002 14:10:06

> removing the flashcard from the pcmcia slot also hangs the kernel.
> So it seams a flashcard issue (I had issues with this card in the early 2.4.x
> kernels, but it would hang the kernel at insertion)

IDE card eject was broken in the new IDE code but should have been
fixed, unless it has come broken again. I'll investigate at some point
soon

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

by **Take Vo** » Wed, 23 Oct 2002 14:30:15

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

> > removing the flashcard from the pcmcia slot also hangs the kernel.
> > So it seams a flashcard issue (I had issues with this card in the early
> > 2.4.x kernels, but it would hang the kernel at insertion)

> IDE card eject was broken in the new IDE code but should have been
> fixed, unless it has come broken again. I'll investigate at some point
> soon

issue remains in 2.5.44, I haven't have a change to check other pcmcia cards,
because I have none

flashcard as reported by 2.4.19 kernel:
hdc: SunDisk SDCFB-2, ATA DISK drive
ide2: ports already in use, skipping probe
ide1 at 0x100-0x107,0x10e on irq 3
hdc: 3936 sectors (2 MB) w/1KiB Cache, CHS=123/2/16
/dev/ide/host1/bus0/target0/lun0:hdc: set_geometry_intr: status=0x51 {
DriveReady SeekComplete Error }
hdc: set_geometry_intr: error=0x04 { DriveStatusError }
p1
ide_cs: hdc: Vcc = 3.3, Vpp = 0.0

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (GNU/Linux)

iD8DBQE9tUKvMMlizP1UqoURAilpAJ9ChjCZbzz4TtFgaxfZ1ewfiw5JFQCfcvw9
Mat3Z0rQ/dOKsEEay/DC83Q=
=/XEj
-----END PGP SIGNATURE-----

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in

More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Very Computer

PROBLEM: USB mouse does not apear in /dev/input

PROBLEM: USB mouse does not apear in /dev/input

PROBLEM: USB mouse does not apear in /dev/input

PROBLEM: USB mouse does not apear in /dev/input

PROBLEM: USB mouse does not apear in /dev/input

PROBLEM: USB mouse does not apear in /dev/input

PROBLEM: USB mouse does not apear in /dev/input

PROBLEM: USB mouse does not apear in /dev/input

PROBLEM: USB mouse does not apear in /dev/input

PROBLEM: USB mouse does not apear in /dev/input

PROBLEM: USB mouse does not apear in /dev/input