Very Computer

> Hi,
> i am seeing a hang on boot on a Crusoe based Vaio C1MHP when enabling
> the ALI IDE Driver:

> These are the last lines:

> Unform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33Mhz system bus speed for PIO modes: override with idebus=xx
> ALI15X3: IDE controller on PCI bus 00 dev 80
>  pci_irq-0293 [05] acpi_pci_irq_derive   : Unable to derive IRQ for device 00:10.0
> PCI: No IRQ known for interrupt pin A of device 00:10.0 - using IRQ 255
> ALI15X3: chipset revision 196
> ALI15X3: not 100% native mode: will probe irqs later

> > Hi,
> > i am seeing a hang on boot on a Crusoe based Vaio C1MHP when enabling
> > the ALI IDE Driver:

> > These are the last lines:

> > Unform Multi-Platform E-IDE driver Revision: 6.31
> > ide: Assuming 33Mhz system bus speed for PIO modes: override with idebus=xx
> > ALI15X3: IDE controller on PCI bus 00 dev 80
> >  pci_irq-0293 [05] acpi_pci_irq_derive   : Unable to derive IRQ for device 00:10.0
> > PCI: No IRQ known for interrupt pin A of device 00:10.0 - using IRQ 255
> > ALI15X3: chipset revision 196
> > ALI15X3: not 100% native mode: will probe irqs later

> Try it without the ACPI first. Let me know if that also hangs

> It does - With acpi=off and acpi=off pci=biosirq (as mentioned in that
> crash). I also tried the somewhere mentioned UDMA66 force (ide0=ata66
> ide1=ata66) which does get over this point but fails to mount the root
> filesystem with IDE errors.