Unex MD010C problems (8139too)

Unex MD010C problems (8139too)

Post by Nigel Wette » Sat, 27 Jul 2002 00:07:59



Under Redhat 7.3, my NIC (link below) is recognized as a
RTL-8139/8139C and works fine, but under the latest Gentoo CD (1.2)
throws this error:

# insmod 8139too
Using /lib/modules/2.4.19-gentoo-r7/kernel/drivers/net/8139too.o
8139too Fast Ethernet driver 0.9.24
/lib/modules/2.4.19-gentoo-r7/kernel/drivers/net/8139too.o:
init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters
#

Can anyone suggest what has changed between Redhat 7.3 (2.4.18-3) and
gentoo 1.2 (2.14.19-gentoo-r7) that might be causing this problem?

--Nigel Wetters

link to NIC page:
http://www.unex.com.tw/Product/NIC/MD010C/md010c.html
http://www.unex.com.tw/Product/NIC/MD010C/tech-md010c.html

 
 
 

1. Do you use Unex 10/100Mbps Fast Ethernet PC Card MD010C?

If so, which Linux distribution are you using?

Thanks if you can help,
Catalin

        <<<< ================================== >>>>
        <<     We are what we repeatedly do.      >>
        <<  Excellence, therefore, is not an act  >>
        <<             but a habit.               >>
        <<<< ================================== >>>>

2. SMC EZ Card 1000 (SMC9462TX) under Debian 2.2r3

3. Unex Wireless on RedHat 7

4. m$ "lost" the source code for W95, DOS, Q-DOS ?

5. Unex NT010C gigabit ethernet NIC

6. Win98+Debian+LFS triple boot setup howto?

7. Unex NexNic012

8. How to list all network interface names ?

9. marse_nwe client32 win98 unex 14 (89fc)

10. Configuring a Unex PCMCIA card under Linux

11. 8139too.c Problem

12. Serious 8139too problems with 2.4.18

13. Problem with module 8139too (0.9.17)