SS20 NIC

SS20 NIC

Post by DKNY » Thu, 17 May 2001 17:27:52



I had 'le' and 'hme' NIC in my SparcStation 20
I made sure link hub.
ip address and netmask is no problem.
le0 192.168.0.1 netmask 255.255.255.0 .....ok
hme0 192.168.0.2 netmask 255.255.255.0 .....ok
Why can't ping my SS20 from another computer? And Where to take care?
....thanks for tell me
 
 
 

SS20 NIC

Post by Chris Harshma » Fri, 18 May 2001 02:43:10


What does your routing table look like?  (`netstat -nr`)
What does the other machine's routing table look like?

> I had 'le' and 'hme' NIC in my SparcStation 20
> I made sure link hub.
> ip address and netmask is no problem.
> le0 192.168.0.1 netmask 255.255.255.0 .....ok
> hme0 192.168.0.2 netmask 255.255.255.0 .....ok
> Why can't ping my SS20 from another computer? And Where to take care?
> ....thanks for tell me


 
 
 

1. SS20 NIC

I had 'le' and 'hme' NIC in my SparcStation 20
I made sure link hub.
ip address and netmask is no problem.
le0 192.168.0.1 netmask 255.255.255.0 .....ok
hme0 192.168.0.2 netmask 255.255.255.0 .....ok
Why can't ping my SS20 from another computer? And Where to take care?
....thanks for tell me

2. Cross-Platform Virus

3. WTB: 8MB VSIMM for SS20 & 2x64MB RAM (128MB Total) for SS20

4. I want Pingus

5. 10/100 sbus NIC not detected in SS20

6. Hang on "loading linux"

7. 2nd NIC in ss20 sol7

8. SCSI Adapter Base Address

9. NIC / network won't load: Compaq Netelligent 10/100 Embedded NIC, Eth0

10. NIC NIC

11. Crossover Cable Needed for Direct NIC 2 NIC?

12. routing - 3comps - one dualport-nic & two "normal" nics

13. How to specify/detect an NIC when using two or more NIC