by Hello,
I have been asked to look after a Unixware 1.1 system.
The first thing I want to do is get a full syatem backup, on 150M tapes,
so that if the disk failed I could add a new disk and restore the
system from tape, without going through an installation and setup.
I would appreciate a detailed description of what I need to do
and how I check the backup is good as I am pretty new to Unix system admin.
Below is the output from the df and prtvtoc commands.
I do not wish to backup the filesystem /.Netware and /em/emusers
Filesystem kbytes used avail capacity Mounted on
/dev/root 1298384 796609 501775 61% /
/dev/dsk/c0t0d0sa 10240 3861 6378 38% /stand
/.NetWare 0 0 0 58% /.NetWare
bj_fts1.bj.co.uk.:/em/emusers
595396 507388 88008 85% /em/emusers
slice 0: DISK permissions: VALID UNMOUNTABLE
starting sector: 32 (cyl 0) length: 2682848 (1309.98 cyls)
slice 1: ROOT permissions: VALID
starting sector: 86112 (cyl 42) length: 2596768 (1267.95 cyls)
slice 2: SWAP permissions: VALID UNMOUNTABLE
starting sector: 20576 (cyl 10) length: 65536 (32.00 cyls)
slice 5: NONUNIX permissions: VALID UNMOUNTABLE
starting sector: 585728 (cyl 286) length: 83968 (41.00 cyls)
slice 7: BOOT permissions: VALID UNMOUNTABLE
starting sector: 32 (cyl 0) length: 34 (0.02 cyls)
slice 10: STAND permissions: VALID
starting sector: 96 (cyl 0) length: 20480 (10.00 cyls)
Any help would be greatly appreciated
Many Thanks
Phil Ratcliffe