by chri » Thu, 16 Oct 1997 04:00:00
At installing a printer to a sco unix sys 5, link_unix returns the
following error msg (about 1000 times):
config.h (249): Multiple definition for SCSI_NSDSK
The referred lines in config.h read:
#define SCSI_NSDSK 3
#define SCSI_NSDSK 1
... independent on what we tried to do.
Can anyone help? The system is dying a slow death, but we need the data to
keep the company alive. (Isn't this a beautiful sentence?) :)
Thanx,
Chris
1. Kernel Relink Problem (fwd)
I'm forwarding this message to the list for a friend. Any assitance is
greatly appreciated. Replies can be sent to:
or
Thanks!
Lance
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
When we attempt to relink our kernel in the sysadmsh, via System ->
Configure -> Kernel -> Rebuild, we get:
/./usr/include/sys/seg.h: 96: undefined control
ERROR: /etc/conf/pack.d/cr_uni/stubs.c will not compile properly
And, if we do a link_unix, we get:
/./etc/conf/cf.d/config.h: 115: undefined control
/./etc/conf/cf.d/config.h: 243: undefined control
/./etc/conf/cf.d/config.h: 381: undefined control
/./etc/conf/cf.d/config.h: 452: undefined control
/./etc/conf/cf.d/config.h: 504: undefined control
/./etc/conf/cf.d/config.h: 547: undefined control
/./etc/conf/cf.d/config.h: 686: undefined control
/./etc/conf/cf.d/config.h: 861: undefined control
/./etc/conf/cf.d/config.h: 923: undefined control
/./etc/conf/cf.d/config.h: 932: undefined control
/./etc/conf/cf.d/config.h: 979: undefined control
/./etc/conf/cf.d/config.h: 1079: undefined control
/./etc/conf/cf.d/config.h: 1102: undefined control
/./etc/conf/cf.d/config.h: 1163: undefined control
/./usr/include/sys/xdebug.h: 83: undefined control
/./usr/include/sys/xdebug.h: 97: undefined control
We have checked the stubs.c file against other systems, and it is
unchanged from the way it shipped from SCO. We tried renaming the
stubs.c file and removing it from the include list; however, the error
then occurs on another file in the /etc/conf/pack.d/cr_uni directory.
We assume our compiler is corrupt, as we had a kernel double-panic some
time back which corrupted several files. We believe the 'include' files
to be OK - we need some advice on where to look for the compiler so we
can check it (them) against other systems. At this time we are unable to
relink our kernel, thus preventing us from implementing upgrades and
tuning.
Dave Wood --------------------------------------------------------------
| Technology Consultant Phone: (219) 758-3141 |
| Region 8 Education Service Center FAX: (219) 758-3142 |
-----------------------------------------------------------------------
2. SBUS card for Sparc20 runnin Sol 2.4?
3. Relinking Kernel Problem with SCO 5.0.2
8. Can ODS combine different sized disks?
9. Error relinking kernel after mkdev parallel
10. Relinking the kernel gives me -