NFS server on HP-UX 10.20 & NFS client on RH-5.2 : write permission ???

NFS server on HP-UX 10.20 & NFS client on RH-5.2 : write permission ???

Post by Nguyen-Dai Qu » Thu, 01 Apr 1999 04:00:00



Hi,
I have a HP-UX 10.20 workstation (named ltas18) and a Linux RH-5.2 box
(named bobo).
I would like to setup NSF with server=HP-UX and client=RH-5.2.

This is my /etc/exports on HP-UX:

/home/dang/quy -anon=65534,root=bobo:ltas22,access=bobo:ltas22
/disk4/dang/quy -anon=65534,root=bobo:ltas22,access=bobo:ltas22

On my Linux "bobo", in the /etc/fstab file I have :

/dev/hda5 / ext2    defaults  1 1
/dev/hda1  /mnt/dos vfat   noauto,user,rw  0 0
/dev/hda6   swap swap    defaults  0 0
/dev/fd0  /mnt/floppy  vfat    user,noexec,nodev,nosuid,rw,noauto 0 0
/dev/cdrom  /mnt/cdrom  iso9660 user,noexec,nodev,nosuid,ro,noauto 0 0
/dev/sda4  /mnt/zip vfat    user,noexec,nodev,nosuid,rw,noauto 0 0
ltas18:/home/dang/quy /mnt/ltas18 nfs user,rw,auto,rsize=8192,wsize=8192
0 0
ltas18:/disk4/dang/quy /mnt/disk4-ltas18 nfs
user,rw,auto,rsize=8192,wsize=8192 0 0

From my account on "bobo" I tried:

$ mount /mnt/ltas18

It works ! But I have not write permission on this ! Howto to acces to
NFS with "rw" permission ? I have already defined "rw" in potion of
fstab !

However, with root on "bobo" I can write into /mnt/ltas18 but with owner
and group ID of my Linux box, not exist in HP-UX machine !!

Howto to define ID of user and ID of group on the remote (server) &
local (client) ????

Thank you very much and it's possible I would like to receive your
message at my e-mail address.

Thanks !
--
NGUYEN-DAI Quy
LTAS-ULG
http://ltas18.ltas.ulg.ac.be/~quy
...Pourquoi utiliser 'window' quand on a une 'door' ?

 
 
 

NFS server on HP-UX 10.20 & NFS client on RH-5.2 : write permission ???

Post by Bernd-Ulrich Adrig » Fri, 02 Apr 1999 04:00:00


Hi,
what about using NIS?

Bernd


Quote:>Hi,
>I have a HP-UX 10.20 workstation (named ltas18) and a Linux RH-5.2 box
>(named bobo).
>I would like to setup NSF with server=HP-UX and client=RH-5.2.
<snip>
>It works ! But I have not write permission on this ! Howto to acces to
>NFS with "rw" permission ? I have already defined "rw" in potion of
>fstab !

>However, with root on "bobo" I can write into /mnt/ltas18 but with owner
>and group ID of my Linux box, not exist in HP-UX machine !!

>Howto to define ID of user and ID of group on the remote (server) &
>local (client) ????

>Thank you very much and it's possible I would like to receive your
>message at my e-mail address.

>Thanks !
>--
>NGUYEN-DAI Quy
>LTAS-ULG
>http://ltas18.ltas.ulg.ac.be/~quy
>...Pourquoi utiliser 'window' quand on a une 'door' ?


 
 
 

1. Difference between HP-UX 10.10 and HP-UX 10.20

Hello,

what are the differences between HP-UX 10.10 and HP-UX 10.20?

I ask because one of our customers want to evalute our software
(which was developed on 10.10) on HP-UX 10.20. Is there full
backward compatibility?

Thanks for your helps

        Rainer

--
--
Rainer Freis    -       Systemadministrator

santix software GmbH
Max-Planck-Str. 7
D-85716 Unterschleissheim

Phone: (+49) 89 321506-24
Fax  : (+49) 89 321506-99

You don't know what real time-critical software is until
you're responsible for the paychecks of a battalion of
heavily armed Marines.

        (somebody in alt.sysadmin.recovery)

2. duplicate pipe problem

3. ARCserve 2.2.0l UW7 server backup of HP-UX 10.20 client failure

4. Telnet and DNS probs

5. NFS V3 between HP/UX 10.20 and Solaris 2.6

6. Sound Config

7. ODBMS for Linux

8. HP hangs with NCR-SCSI error messages on HP-UX 10.20 & 11.00

9. Permissions Error when upgrade patches on HP-UX OS 10.20

10. /usr: write failed, file system is full (HP-UX 10.20)

11. xload (HP-UX 10.20) --> RH 6.0 bogs down system, never displays window

12. NFS quota: Linux client + HP-UX server