Running 10/100 BaseT NIC in RS6000 Models????

Running 10/100 BaseT NIC in RS6000 Models????

Post by Scott Adam » Thu, 31 Jul 1997 04:00:00



Has anyone tried to run a 10/100 BaseT NIC in the RS6000 model 530H, 570,
or 970???

Is there a RS6000 news group??


International Cancer Information Center           Bethesda, Maryland
Phone:  (301) 402-0727                          Fax:  (301) 480-8105

 
 
 

1. 10/100 Ethernet SWITCH (to be used for Fast Ethernet LAN, and 10-BaseT cable modem)

You can get a two-port switch from Netgear or Linksys for under $100US, that
will work fine.  You'll need a 100baseTX hub on the fast side and a 10baseT
hub on the slow side, as well.

10/100 ISA cards do exist, but quite frankly unless you find them used or at
auction, it will probably be cheaper to put in a PCI motherboard.

Don't really know what's fastest and most stable for Linux--Intel works well
for Novell and NT.

--

--

--John

Reply to jclarke at eye bee em dot net

2. Spontaneous reboot

3. Which driver for nic D-Link 10/100 model DFE-530TX REV-A3

4. FreeBSD Newbie - Issue #1 (Reprint) September 1999

5. 10/100 BaseT Ethernet cards in 550 ?

6. Thousands of defunct processes -- how do i clear them?

7. 10/100 baseT card supported by linux for home network

8. RH 4.2 LILO Won't install

9. NEC 10/100 BaseT(x) Hub Card

10. SMC Etherpower 10/100 BaseT

11. 100 BaseT Board on rs6000

12. NIC / network won't load: Compaq Netelligent 10/100 Embedded NIC, Eth0

13. 10/100 card won't talk to 10/100 hub