Apache+SSLLeay giving "missing tmp rsa key"

Apache+SSLLeay giving "missing tmp rsa key"

Post by Michael Baxt » Wed, 17 Dec 1997 04:00:00



Hi there all.

O have just got SSLeay installed in to Apache and have generated a
certificate using "make certificate".  However, upon accessing my
"secure" server, I get the following error in the log:

SSL_Accept failed
error:1409B0A5:SSL routines:SSL3_SEND_SERVER_KEY_EXCHANGE:missing tmp
rsa key

Netscape detects the cert, and asks me to "ok" it.  After this, there
is an I/O error displayed.

What is is that I have not done, or set up wrong?

Thank you very much....


               WIN with http://www.postbox.co.nz
         1 in 10 applications WIN Free email for a year

Baxter Innovations          Purveyors of Innovative Technologies
P.O. Box 56-227, Mt Eden,        http://innovations.utopia.co.nz        

 
 
 

1. "weof" operation in "mt" command gives "permission denied"

Hi,

Some time ago I made a mistake and deleted my /dev directory.  Since
then, I have had to occasionally run the "mknod" command to create a
device here and there.  I did have a directory list of /dev, and I have
used that as a guide for which major and minor node numbers to use, and
which type of file to create.

Anyway, my Exabyte 8200 is /dev/nrst0, which is listed as:

  crw-rw-rw-   1 root     wheel      9, 128 Oct 29 09:30 /dev/nrst0

I am trying to write 2 eof marks after the end of file 0, so that I can
re-write file 1.  The sequence that I use for this on the the same tape
at work (and this works just fine) is:

  1) mt -f /dev/nrst0 asf 1   position after the first eof (after file 0)
  2) mt -f /dev/nrst0 bsf 1   position before the first eof
  3) mt -f /dev/nrst0 weof 2  make it look like file 0 is only file on tape
  4) mt -f /dev/nrst0 bsf 1   position after the first eof

When I try this with linux, the weof command (step 3) results in:

  mt: /dev/nrst0: Permission denied

Is this a problem with the driver, or is there something wrong with my
device definition.  According to the man page, I should be able to do
this under Linux pretty much the same as it works under SunOS.

There is no problem writing to the tape otherwise.

I have Slackware 2.x.

thanks,
tw

2. Dynamic IP Addressing over Ethernet

3. GETSERVBYNAME()????????????????????"""""""""""""

4. Redhat 7.X reboot problem on Compaq SP700 workstations

5. "DES" and "RSA" C SourceCode

6. File access from a different machine

7. """"""""My SoundBlast 16 pnp isn't up yet""""""""""""

8. X session crashes

9. extention "RENDER" missing on display ":"0.0".

10. Urgent: "lpc stat" and "lpc stat lj02" gives different result

11. LINUX gives me "out of memory" & "killed" why?

12. network failed, and "ifconfig","demsg" gave me this info

13. "df" and "du" give different results!