by TOHS » Sat, 12 Dec 1998 04:00:00
I have this problem, I was wondering if it is possible to configure any
of the comms adapter in my RS6000 F50 to subsitute the 128 Port Asyn
Adapter.
The 128 port Asyn adapter is connected to an asyn modem for remote dial
in.
I currently have 3 serial port, 1 X.25 card and 1 x 4 port adapter.
Please advice....
Thanks TohS
by AAA » Sat, 12 Dec 1998 04:00:00
Please advice if it is possible to reconfigure any of these comms
adapter to suit the 128 port asyn adapter. The 128 port asdapter is used
for connection to an asyn modem for remote dial in.
I currently ha 3 serial port, 1 x X.25 adapter and 1 x 4 port adapter in
my system.
Please reply ..... Urgently need your help.
Thanks TohS
by Gustav Yeun » Sat, 12 Dec 1998 04:00:00
The 128-port card is an asynchronous serial comm device (RS232, V.21..,
etc.) Your
3 serial port can be migrated to this card. If your X.25 and 4-port
adapter doesn't
interface with RS232 or equivalence, you can't move the connections to
the 128-port
card.
> Hello,
> Please advice if it is possible to reconfigure any of these comms
> adapter to suit the 128 port asyn adapter. The 128 port asdapter is used
> for connection to an asyn modem for remote dial in.
> I currently ha 3 serial port, 1 x X.25 adapter and 1 x 4 port adapter in
> my system.
> Please reply ..... Urgently need your help.
> Thanks TohS
(Please remove NOSPAM when replying)
1. Problem adding tty port using 128 Port Async Adapter with 16 port Async Node
This system is 43P-140 AIX 4.2.1.x with PCI 128 port Async. with 2 16 port
RAN EIA-232
I am tring to add tty ports to my ran system. When I go to to smit
1)smitty tty
2)Add a TTY
3)tty rs232 Asynchronous Terminal
4)sa3 Available 04-05-22 16-Port RAN EIA-232 for 128-Port Adapter
I then get this error message
1800-109 There are currently no additional
SMIT screen entries available fo this
item This item may require installation of
additional software before it can be accessed.
I have these files loaded
devices.pci.4f111b00.asw 4.2.1.0 COMMITTED PCI 128-Port Asynchronous
devices.pci.4f111b00.diag 4.2.1.2 COMMITTED RISC PC PCI Async 128 Port
devices.pci.4f111b00.rte 4.2.1.2 COMMITTED PCI 128-Port Asynchronous
devices.pci.4f111b00.rte 4.2.1.0 COMMITTED PCI 128-Port Asynchronous
devices.common.IBM.cx.rte 4.2.1.2 COMMITTED CX Common Adapter Software
I noticed devices.pci.4f111b00.rte 4.2.1.0 is defferent version I 4.2.1.2
from
ibm web site but failed know how to get it to load twice (newbie).
I also notice I have devices.pci.4f111100.com 4.2.1.2 COMMITTED PCI 8-Port
Asynchronous Adapter
Can not uloaded this smit deinstall reports dependents for these
devices.pci.4f111b00.rte 4.2.1.0 COMMITTED PCI 128-Port Asynchronous
devices.pci.4f111b00.diag 4.2.1.2 COMMITTED RISC PC PCI Async 128 Port
This may be were the problem is.
Thanks for any help,
Lance Adams
2. Mail server
3. Configuring 16-port RAN on 128-port adapter?
4. Anyone know about Linux support of Castlewood's ORB? (EIDE I/F)
5. 8-port asyn adapter drivers
6. comp.unix.shell FAQ - Answers to Frequently Asked Questions
7. How to install ISA 8 port asyn. adaptor
8. When to use -N for compiling ?
9. Need Used 128 Port Aysynch Adapter
10. F30 & 128-port Asynch Adapter
11. 128 port adapter installation