ICVerify 7.00.00 Settlement!

ICVerify 7.00.00 Settlement!

Post by Marshall Luca » Thu, 23 Dec 1999 04:00:00



Anyone here use ICVerify 7.00.00 for AIX?  I upgraded from 6.62.00 and am
unable to get it to settle.  It times out every time...but, if I reload back
to 6.62 with the same data, it settles immediately without trouble.  I've
tried getting help from the folks at ICVerify but they want $1000 just to
answer my question.  This is the only real problem I've had with it so I
hardly thinks it's worth the $1000 for a year long support contract that I
won't use.

--
--
-- Marshall Lucas
-- Director of MIS
-- Petra Industries, Inc.
-- "The views I express are my own and as such are assumed to be 100%
accurate!"
--

 
 
 

1. SOLVED : LILO gives me L 00 00 00 00 00 00 00

To everyone who mailed me with there suggestions and for my answers here
it is.

I finally did some checking and found that my BIOS was pretty new and
that where
it specifies the hard drives there is a column called Mode. This goes
from 1 to
4 and is as follows.

Mode 1 = Normal - all cylinders, heads and sectors stay the same.
Mode 2 = Large - it doubles your heads and halves your cylinders.
Thereby getting
                 less cylinders. However for my drive it was still over
1024.
Mode 3 = LBA - it quadruples your heads and divides your cylinders by 4.
Thereby
               getting even less cylinders than Large mode. This left me
with
               cylinders =  621, heads = 64, sectors = 63 which use to
be
                         = 2484,       = 16,           63.
Mode 4 = Auto - Don't know what this is for, but it did not work for me.

This approach probably won't work for most people with older BIOS's.
Unfortuanately I could not get to a linux software solution after many
hours
of testing different setups and posts. Hope this helps someone.

:-)

-------------------------------------------------------------------------------
Mr Zahir Toufie, Systems Consultant, NHD IT (Info Tech) Cape Tech
-------------------------------------------------------------------------------
Fax. (W) 808 4102        
Tel. (W) 808 3580     (H) 633 2695     (C) 083 268 8301
    ** Use dial code 021 for National or +27 21 for International calls.
**
-------------------------------------------------------------------------------

Home Page http://www.sun.ac.za/local/admin/infoteg/ard_pers.html
-------------------------------------------------------------------------------

2. non switchable cards ?

3. Help LILO gives me L 00 00 00 00 00 00 00

4. AIX, ssh 2.1 & authen.

5. DHCP Server Leasing Addresses to MAC Addresses of 00-00-00-00-00-00

6. those bloody password sniffers

7. HELP: ifconfig reports hwaddr 00-00-00-00-00...

8. 2.4.21 synclink_cs.c

9. LILO / L 00 00 00 ... / Large Disk problems

10. BootMagic LILO hangs with 00 00 00...

11. Ethernet Address 00-00-00...

12. error: received bad configure nak/rej 12 00 00 00

13. LILO prints "00 00 00..."