Very Computer

I have a SSA RAID D40 connected to two adapters in an H70 server. Now
for making a RAID 1 do I need to add disks on both the adapters as
Array candidate disks. I tried to make a RAID 1 array here, can someone
gives me the steps of doing so with two adapters,
do I need to replicate my steps for both adapters
ie.. get array candidate disks, specify them as primary disks and make
an array??????????

Your replies and suggestions are welcome.

AmShaik.

Sent via Deja.com http://www.deja.com/
Before you buy.

Quote:

> Hi there,

> I have a SSA RAID D40 connected to two adapters in an H70 server. Now
> for making a RAID 1 do I need to add disks on both the adapters as
> Array candidate disks. I tried to make a RAID 1 array here, can someone
> gives me the steps of doing so with two adapters,
> do I need to replicate my steps for both adapters
> ie.. get array candidate disks, specify them as primary disks and make
> an array??????????

--> on the first server
smitty ssaraid
change/show use of multiple ssa physical disk
    select all disks you want to be Array Candidate Disk

add an SSA Raid Array

--> on the second server
delete the old hdisks (rmdev -dl hdiskx where x is a number)
run the cfgmgr -v command (the -v parameter is to select verbose mode)
now you should be able to view the RAID

Hope this helps you.

Best regards,
Mario

Remove NO SPAM to email me.
HTML enhanced e-mail are *NOT* welcome