by David Schuman » Tue, 19 Sep 2000 04:00:00
10/100 Ethernet Adapter (MCA, Part # 2994)
AIX 4.3.3
RS/6000 7030-3CT
Thank you.
David Schumann
by John Fishe » Tue, 19 Sep 2000 04:00:00
- smitty tcpip/further config/network interfaces/selection/change: set
interface to detach
- smitty devices/communications/Ethernet/adapter/change: set speed and full
- smitty tcpip/further config/network interfaces/selection/change: set
interface to up
- re-establist static routs removed by detach.
> I have an Ethernet Adapter that I believe is having trouble negotiating
> speed/duplex mode with the LAN switch. I would like to set the adapter for a
> fixed speed and duplex mode to see if that helps. Any help with the
> procedure would be appreciated.
> 10/100 Ethernet Adapter (MCA, Part # 2994)
> AIX 4.3.3
> RS/6000 7030-3CT
> Thank you.
> David Schumann
by sarah.. » Wed, 20 Sep 2000 04:00:00
If the router is set on auto discovery then you need to be explicit.
Generally, I avoid auto settings on my servers like the plague because
it causes nothing but problems.
Sarah
Sent via Deja.com http://www.deja.com/
Before you buy.
by David Schuman » Wed, 20 Sep 2000 04:00:00
> - smitty tcpip/further config/network interfaces/selection/change: set
> interface to detach
> - smitty devices/communications/Ethernet/adapter/change: set speed and
full
> - smitty tcpip/further config/network interfaces/selection/change: set
> interface to up
> - re-establist static routs removed by detach.
> > I have an Ethernet Adapter that I believe is having trouble negotiating
> > speed/duplex mode with the LAN switch. I would like to set the adapter
for a
> > fixed speed and duplex mode to see if that helps. Any help with the
> > procedure would be appreciated.
> > 10/100 Ethernet Adapter (MCA, Part # 2994)
> > AIX 4.3.3
> > RS/6000 7030-3CT
> > Thank you.
> > David Schumann
by <Unknown> » Wed, 27 Sep 2000 04:00:00
> 10/100 Ethernet Adapter (MCA, Part # 2994)
> AIX 4.3.3 RS/6000 7030-3CT
> Thank you.
by Hartwig Bol » Wed, 27 Sep 2000 04:00:00
Hi DAvid,
use smitty, devices
then choose your ethernet adapter, change characteristics
set media speed to the desired value and choose the last option "apply
to database only"
then reboot and then the speed should be changed.
verify settings with netstat -v .
regards
Hartwig
>> I have an Ethernet Adapter that I believe is having trouble negotiating
>> speed/duplex mode with the LAN switch. I would like to set the adapter
>> for a fixed speed and duplex mode to see if that helps. Any help with
>> the procedure would be appreciated.
>> 10/100 Ethernet Adapter (MCA, Part # 2994)
>> AIX 4.3.3 RS/6000 7030-3CT
>> Thank you.
1. 10/100 MCA Ethernet Card --> Force to half-duplex?
We have installed a few 10/100 MCA Ethernet cards which become configured as
100Mb full-duplex when they come up. Our software vendor keeps telling us
that when we replace the balance of them on our hosts (retiring dual FDDI
rings) that our system will be unstable unless we force the cards to
half-duplex.
Search as I might, I cannot find a smit, or other command that will allow
the modification of an attribute to accomplish this. What have I missed?
If all else fails, I can force half-duplex at the network switch by
configuring the port as half duplex, but this brings along with it a few
logistical issues (keeping that host on that "specially configured" port,
....
2. Is there any software DVD player for Linux?
3. ifconfig and 10/100 speed/duplex
5. How do I force ethernet 10/100 and half/full duplex ?
7. AIX v4.2 10/100 Ethernet Driver or 10 Ethernet card
8. FDISK /MBR doesn't remove LILO
9. setting 10/100 and Full/Half Duplex
10. 10/100 Ethernet SWITCH (to be used for Fast Ethernet LAN, and 10-BaseT cable modem)
11. Connection speed on 10/100 MBit ethernet
12. How to force the speed of a 10/100/1000 ethernet card to 1000
13. How to adjust speed & duplex mode (Inter(R) Ethernet PRO/100+)