by amshai.. » Wed, 27 Sep 2000 04:00:00
Now I have two adapters on my H70 and when I try to create array it
first goes to chose the adapter (2 in my case ) so do I need to
duplicate my RAID configuration for both adapters????
Second is that Do I need to put equal disks in Primary and Secondary
option for RAID 1.
Regards
AmShaik
Sent via Deja.com http://www.deja.com/
Before you buy.
1. Re-using SSA disks previously members of a SSA RAID array
On Tue, 16 Mar 1999 20:12:12 -0500 a carbon-based biped by the name of Lekic
Somewhere under the SSA Raid menu entry in the smit|Devices menu,
there is a point that will let you change the usage of a SSA disk.
If a disk has been a member of an array, it is probably listed as
'Array candidate disk' or 'Hot Spare'.
Change that to 'AIX system disk' for all the disks, and you should
be able to re-use the units as normal SSA disks.
Regards
Peter
2. Help... DIP dials and starts SLIP, but network unreachable
3. Reusing SSA disks used as RAID array members
4. eDonkey file sharing and Cisco router
5. Adding a disk to a SSA RAID Array
7. Increasing numbers of SSA-disks in an existing RAID-5 array
9. AIX/SSA Raid 5, add disk to existing raid
10. Expanding an SSA RAID 5 Array?
11. SSA Raid Array and AIX Upgrading
13. Problem with SSA-Raid-5-Array offline