Board index Aix

GXT130 missing software on 4.3.2??

GXT130 missing software on 4.3.2??

Post by Simon » Fri, 21 Sep 2001 18:32:55



Hi, when I first built my w'station I had a devil of a time getting the
graphics / CDE to work. I eventually found that there was some fileset
missng from the AIX 4.3.2 cd's. The adapter is a GXT130P.
devices.pci.2b100010.rte & devices.pci.2b102005.rte installed.

The thing is due to unforseen cirmumstances (blasted managers and no
backup available) I have had to go through the whole loop again.

The error I get in /var/dt/Xerrors is;

1362-020 Cannot locate required graphics adapter software.
        Run 'smit cfgmgr' to Install/Configure Devices Added After IPL.
1362-020 Cannot locate required graphics adapter software.
        Run 'smit cfgmgr' to Install/Configure Devices Added After IPL.

Thu Sep 20 09:07:30 2001
error (pid 2606): Server for display :0 terminated unexpectedly 1

Thu Sep 20 09:07:30 2001
error (pid 2606): Unknown session exit code -1 from process 3636
Xerrors: END

cfgmgr does not throw up any errors. Nothing usefull in errpt.

Does this sort of problem spring to anyones mind? - can you remember
what was missing?

cheers

SimonM.

 
 
 
Top

GXT130 missing software on 4.3.2??

Post by Sgille » Sat, 22 Sep 2001 04:36:27


Not all drivers for the GXT130P graphics card are included on the 4.3.2 AIX

 cd. You need to get the AIX 4.3 Update Cd that is dated June 1999, number
 9906.

 Customers should order the JUNE 4.3.2 Update CD which contains:

 GXT130P Graphics Adapter (#2830)

 Required Filesets
 devices.pci.2b102005.X11 4.3.2.0
 devices.pci.2b102005.rte 4.3.2.1
 devices.pci.2b101a05.X11 4.3.2.4
 devices.pci.2b101a05.rte 4.3.2.4

 Optional Diagnostics Fileset
 devices.pci.2b102005.diag 4.3.2.0

 Without the filesets you get a 1362-020 Cannot find graphics adapter
 software....or a 1356-800 xinit: unable to start software.
 ftpibm site for 4.21
 or http://service.software.ibm.com/support/rs6000.support/downloads and
 search on ptf u465064
--------------------------------------------------------------------


> Hi, when I first built my w'station I had a devil of a time getting the
> graphics / CDE to work. I eventually found that there was some fileset
> missng from the AIX 4.3.2 cd's. The adapter is a GXT130P.
> devices.pci.2b100010.rte & devices.pci.2b102005.rte installed.

> The thing is due to unforseen cirmumstances (blasted managers and no
> backup available) I have had to go through the whole loop again.

> The error I get in /var/dt/Xerrors is;

> 1362-020 Cannot locate required graphics adapter software.
>         Run 'smit cfgmgr' to Install/Configure Devices Added After IPL.
> 1362-020 Cannot locate required graphics adapter software.
>         Run 'smit cfgmgr' to Install/Configure Devices Added After IPL.

> Thu Sep 20 09:07:30 2001
> error (pid 2606): Server for display :0 terminated unexpectedly 1

> Thu Sep 20 09:07:30 2001
> error (pid 2606): Unknown session exit code -1 from process 3636
> Xerrors: END

> cfgmgr does not throw up any errors. Nothing usefull in errpt.

> Does this sort of problem spring to anyones mind? - can you remember
> what was missing?

> cheers

> SimonM.


 
 
 
Top

GXT130 missing software on 4.3.2??

Post by Simon » Tue, 25 Sep 2001 22:07:42



> Hi, when I first built my w'station I had a devil of a time getting the
> graphics / CDE to work. I eventually found that there was some fileset
> missng from the AIX 4.3.2 cd's. The adapter is a GXT130P.
> devices.pci.2b100010.rte & devices.pci.2b102005.rte installed.

> The thing is due to unforseen cirmumstances (blasted managers and no
> backup available) I have had to go through the whole loop again.

> The error I get in /var/dt/Xerrors is;

> 1362-020 Cannot locate required graphics adapter software.
>         Run 'smit cfgmgr' to Install/Configure Devices Added After IPL.
> 1362-020 Cannot locate required graphics adapter software.
>         Run 'smit cfgmgr' to Install/Configure Devices Added After IPL.

> Thu Sep 20 09:07:30 2001
> error (pid 2606): Server for display :0 terminated unexpectedly 1

> Thu Sep 20 09:07:30 2001
> error (pid 2606): Unknown session exit code -1 from process 3636
> Xerrors: END

> cfgmgr does not throw up any errors. Nothing usefull in errpt.

> Does this sort of problem spring to anyones mind? - can you remember
> what was missing?

> cheers

> SimonM.

OK, the missing sw I got from IBM was devices.pci.2b102005.diag &
devices.pci.2b102005.X11

HTH someone.

 
 
 
Top

1. Missing software ... find what I'm missing

I get this output when running ./configure
Which package do I miss...
I just installed gcc++ and all its depencies, isn't it working ?
I use RedHat 7.3 in a KDE env.

loading cache ./config.cache
checking for a BSD compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... yes
checking for working aclocal... missing
checking for working autoconf... missing
checking for working automake... missing
checking for working autoheader... missing
checking for working makeinfo... missing
checking for gcc... gcc
checking whether the C compiler (gcc  ) works... yes
checking whether the C compiler (gcc  ) is a cross-compiler... no
checking whether we are using GNU C... yes
checking whether gcc accepts -g... yes
checking for c++... no
checking for g++... no
checking for gcc... gcc
checking whether the C++ compiler (gcc  ) works... no
--
Rutger Claes

LINUX, because rebooting is for adding new hardware

2. Newbie questions: Best web language? How to Perl for PC?

3. Driver GXT130 for AIX 4.3.2

4. Kdm screensaver?

5. hit and miss access with internet software

6. man in SLS doesn't work -> HELP!

7. cannot install software because of missing files

8. Any support for parallel port devices??

9. Important software FreeBSD misses that Linux has?

10. libpng.so.3 - missing library file missing

11. Missing Librarys / sendmail is missing libgdbm.so.2

12. Linux Software Map software Mail-Order

13. new software (and updated software)


All times are UTC
Board index