FIRMWARE UPDATE ON 43P-150

FIRMWARE UPDATE ON 43P-150

Post by Luk Vandenbussc » Sat, 04 Jan 2003 17:28:32



Hello,

We tried to update the firmware on our RS6000 43P-150.
The result is not so good.
The display shows a non-flashing 888, and that is all.

Does anybody has an idea how we can solve this problem??

Greetings

 
 
 

1. WTT: IBM RS/6000 B50 for a 43P-150 or 43P-260

I have a almost-new IBM RS/6000 B50 (7046). The B50 is a 19" 2U Rack Server
which is technically identical to a 43P-150. It has a 375MHz CPU, 256MB RAM
and one 9GB disk drive. Since its basically a 43P in a different housing
its of course supported by AIX 5.02.

Heres some information about the B50:
http://www-132.ibm.com/content/home/store_IBMPublicUSA/en_US/eServer/...

Because I have no use for a 19" machine but need a stand alone RS/6000 Im
looking to trade this machine for a 43P-150 (even with slower CPU) or an
43P-260 with 200MHz POWER3. Machine doesnt need to have much RAM, and I
dont need gfx or disks or other drives.

Real offers only, I dont need even more adresses of hardware brokers ;-)

Benjamin

2. Portscan detection

3. WTT: IBM RS/6000 B50 for an 43P-150 or 43P-260

4. Request for help

5. E14D on 7043-150 (43p model 150)

6. Sendmail/UUCP - uux problems

7. WTB: 43P-150 case

8. Can't log in as root! Why?

9. WTB: 43P-150 Case

10. 43P-150 cannot boot up

11. Run 4.2.1 on 43P-150?

12. 43P-150 boot problem

13. Booting 43P-150 with SuSE 6.3.