Gettin SSA Raidinfo into SSA Raidadapter

Gettin SSA Raidinfo into SSA Raidadapter

Post by Hajo Ehler » Fri, 04 Feb 2000 04:00:00

Hi folks,
After replacing a SSA Raidapter i do not know how to get the RAID info
from the raid-system into the adapter.
Any hints ?

Hajo Ehlers


1. Re-using SSA disks previously members of a SSA RAID array

On Tue, 16 Mar 1999 20:12:12 -0500 a carbon-based biped by the name of Lekic

Somewhere under the SSA Raid menu entry in the smit|Devices menu,
there is a point that will let you change the usage of a SSA disk.
If a disk has been a member of an array, it is probably listed as
'Array candidate disk' or 'Hot Spare'.
Change that to 'AIX system disk' for all the disks, and you should
be able to re-use the units as normal SSA disks.



2. Login Banner for Telnetd

3. Trade: 8218 18GB SSA drives for 8209 9GB SSA drives

4. PDF on the FLY!

5. Useful SSA script (was: Mirrors Screwed up in SSA)

6. Need help in using PAM framework.

7. maymap for SSA 160 and SSA D40?

8. Pirated Software

9. SSA RAID 5 vs SSA Mirroring

10. SSA Target-Mode interface

11. Redeployment of IBM SSA disk arrays?

12. ssa drives