How to check all the CPU are up and running?

How to check all the CPU are up and running?

Post by l.. » Tue, 13 Jun 2000 04:00:00



We have IBM RS/6000 model 70 with AIX 4.3.2 installed.  My question is
how to check all of the CPUs in it are up and runnig?

Thanks

Sent via Deja.com http://www.deja.com/
Before you buy.

 
 
 

How to check all the CPU are up and running?

Post by dinoher.. » Tue, 13 Jun 2000 04:00:00


sar -PALL 5 5  That is if it's installed...



> We have IBM RS/6000 model 70 with AIX 4.3.2 installed.  My question is
> how to check all of the CPUs in it are up and runnig?

> Thanks

> Sent via Deja.com http://www.deja.com/
> Before you buy.

Sent via Deja.com http://www.deja.com/
Before you buy.

 
 
 

How to check all the CPU are up and running?

Post by Matthew Land » Tue, 13 Jun 2000 04:00:00



> We have IBM RS/6000 model 70 with AIX 4.3.2 installed.  My question is
> how to check all of the CPUs in it are up and runnig?

> Thanks

> Sent via Deja.com http://www.deja.com/
> Before you buy.

Cause good load... Then

sar -P 1 ALL

 
 
 

How to check all the CPU are up and running?

Post by Robert Allin » Tue, 13 Jun 2000 04:00:00


pstat -S

>We have IBM RS/6000 model 70 with AIX 4.3.2 installed.  My question is
>how to check all of the CPUs in it are up and runnig?

>Thanks

>Sent via Deja.com http://www.deja.com/
>Before you buy.

 
 
 

How to check all the CPU are up and running?

Post by Bill He » Wed, 14 Jun 2000 04:00:00



>We have IBM RS/6000 model 70 with AIX 4.3.2 installed.  My question is
>how to check all of the CPUs in it are up and runnig?

        bindprocessor -q

Output looks similar to this:

        The available processors are: 0 1 2 3 4 5 6 7 8 9 10 11

This command is part of the bos.mp LPP.

Regards,

MWH

 
 
 

1. I am with the following error, when i am running lilo...

Hi,
       I could't understand whats going wrong.
I compiled new kernel with kgdb patch..and entered the details in /etc/lilo.conf
and running lilo..

i got the following lines..

Warning: /etc/lilo.conf should be writable only for root ( I am in root login only)
Warning: device 0x0306 exceeds 1024 cylinder limit.

geo_comp_addr: Cylinder number is too big (  1146 > 1023).

Could any one help me out...

thanks,
srinivas.

2. VT100 keyboards and Linux

3. I am in text mode, what browser am I running....

4. COL: Why do I have to configure eth0 on bootup?

5. Shape Ups,Men's Shape Ups,Men's Skechers Shape Ups - new styles!

6. Expedia.com Recognized by Media Metrix as the Most Visited Online Travel Site For Unprecedented Sixth Straight Month

7. Machine with multiple CPUs: which CPU is running which process?

8. .forward file

9. Am Power Smart UPS daemon around?

10. Matrox Mystique ands X.

11. Debugger, run time checking, attaching to a running process

12. Run time consistency check of OS and Application running in RAM