by Dave Remi » Wed, 14 Feb 1990 02:02:56
Anybody out there have a UNIX V.386 driver for the Bell ACE board thats
newer than 0.7 Beta? Any idea how to get hold of such a beast??
Thanks in advance!
Dave
--
Dave Remien +*+*+*+*+*+*+*+*+*+*+*+*+*+*+ WINCO Computer Engineering Group
by Karl Lehenbau » Thu, 15 Feb 1990 02:06:25
What is weird, though, is that since we replaced our WD ST-506 interface and
dual Miniscribe 72 MB drives with a Maxtor 8760 (660 MB or so formatted,
15 Mbps) and a WD1007-VSE2 controller about a week and a half ago, the ACE
board has not hung even one time. It used to hang once every day or two.
--
-- uunet!ficc!karl "...as long as there is a Legion of super-Heroes,
uunet!sugar!karl all else can surely be made right." -- Sensor Girl
1. intel e1000 driver, why is the latest version 6.2.15 not in the latest kernel?
In Linux 2.6.14 the following version of Intel pro e1000 (gigabit)
ethernet driver is included.
#define DRV_VERSION "6.0.60-k2"DRIVERNAPI
yet, i note that at
http://sourceforge.net/project/showfiles.php?group_id=42302&package_i...
it is shown that driver VERSION 6.2.15 is out as of Oct 13, 2005. The
6.0.60 version is from June 2005 whcih si much older.
Can anyone comment on what is the process by which newer version of
drivers (such as this e1000) make it to new kernel releases?
I owuld like to try newer version of the drivers since I am having
trouble with the options:
options e1000 InterruptThrottleRate=0,0,0,0,0,0 TxIntDelay=0,0,0,0,0,0
TxAbsIntDelay=0,0,0,0,0,0 RxAbsIntDelay=0,0,0,0,0,0
with the driver that is in 2.6.14 standard release. I tried to use the
latest version of the driver by merely substituting files under
drivers/net/e1000, but I get lots of the following messages on the
console:
network driver disabled interrupts: e1000_xmit_frame+0x0/0xbd0 [e1000]
network driver disabled interrupts: e1000_xmit_frame+0x0/0xbd0 [e1000]
network driver disabled interrupts: e1000_xmit_frame+0x0/0xbd0 [e1000]
network driver disabled interrupts: e1000_xmit_frame+0x0/0xbd0 [e1000]
printk: 10 messages suppressed.
Thanks.
Gautam
3. Q: How do I get from the latest stable kernel version to the latest prepatch version ?
5. high speed serial boards (was Re: Multiport serial boards)
7. Latest Version of AX.25 Drivers?
9. which xntp (solaris version or the latest version) should be used
10. Need Latest Version of Linux CD-ROM Version
11. buglet in xc version xc+rz (latest version)
12. ACE 5000 Multifunction Board and CDROM Installation
13. Serial Board Driver!! (Intellicon)