Hey all,
I got an error message on our unix system this morning. I would appreciate
any help.
The message is:
table_glow = exec date page table limit of (25) maxex?
Our system is 24 * 7 sco v5.0.5.
Thanks in advance
I got an error message on our unix system this morning. I would appreciate
any help.
The message is:
table_glow = exec date page table limit of (25) maxex?
Our system is 24 * 7 sco v5.0.5.
Thanks in advance
> Hey all,
> I got an error message on our unix system this morning. I would appreciate
> any help.
> The message is:
> table_glow = exec date page table limit of (25) maxex?
> Our system is 24 * 7 sco v5.0.5.
> Thanks in advance
See TA #: 105076 on www.sco.com/ta
--
---------------------------------------------
Pat Welch, UBB Computer Services
SCO Authorized Reseller
Unix/Hardware/BB Sales & Support
Year 2000: Consulting and Repairs
*** 74 Days left 'til 1/1/2000 **
(209) 745-1401 Fax: (209) 745-5640
Nationwide pager: (800) 608-7122
----------------------------------------------
1. Upgrading (v5.0.4->v5.0.5) information...
I have a system with v5.0.4 and I have the v5.0.5 package ready to be
installed...
The v5.0.5 is a complete package (don't know if upgrade versions exists, but
what I have is a complete one): is there anything I should know before
starting to install it ?
Since I'm not so fond of upgrading under *nix platforms, could someone just
tell me if it is a PLAIN process or a PAIN process ???
I have some applications running and would not like to shutdown the entire
system for a couple of weeks because of my stupidity... I would get fired,
instead of promoted ;-)
Thank you.
2. NIS Problem
4. wvdial
5. problem with packet forwarding on SCO OS5.0.5
6. Another kppp problem as user
7. Fwd: rpm-4.2, rpm-4.1.1, rpm-4.0.5, librpm404-4.0.5 release (finally)
8. STYLUS 850
9. SCO 3.2v5.0.5 Error on Fixed Disk - Am I dead?
10. Does anyone has experence to compile omniORB3.02 under SCO OSR5.0.5?
11. R: Compiling mysql-3.23.21on SCO 3.2V5.0.5 (fwd)
13. Fresh install SCO OS5.0.5 with Adaptec 2940U2W SCSI Adapter hangs with F bladinit