by Proyecto Gema » Thu, 06 Jan 2000 04:00:00
When I mount it with :
mount -o cdcase /dev/c1t2d0 /cdrom
names are in lowercase as I need but it appends a dot
at the end of archives without extension and it cuts
names longer than 8.3 (MSDOS style)
How can I mount it correctly?
Thanks.
Sent via Deja.com http://www.deja.com/
Before you buy.
by Dan Merc » Thu, 06 Jan 2000 04:00:00
> When I mount it with :
> mount -o cdcase /dev/c1t2d0 /cdrom
man 1m mount_cdfs
--
Dan Mercer
Opinions expressed herein are my own and may not represent those of my employer.Quote:> names are in lowercase as I need but it appends a dot
> at the end of archives without extension and it cuts
> names longer than 8.3 (MSDOS style)
> How can I mount it correctly?
> Thanks.
> Sent via Deja.com http://www.deja.com/
> Before you buy.
I have a b180 hp box running hpux 10.20. It is a machine of vital
importance to my organization (SAP R/3 Router). Of course there is no
backup either! It has several external scsi disks attached to it on one
logical volume under rootvg. I got one disk to replace all the external
ones. I removed the effected disks, the file systems, nfs exports and
the logical volume using SAM. After I shut down SAM and rebooted the
system I encountered an error. The kernel panics and dumps the system.
It cycles back to the Boot menu. I search the boot devices, everything
looks good. My boot primary boot path is good
"disk(8/0/19/0.6.0.0.0.0.0;0) /stand/vmunix". I tried to repair the
installation path, files, media, from the installation media (CD) but
when the recovery shell ran fsck the shell died. Fsck apparently can
not fix all the errors. I also can not get into /etc/fstab to edit it
from single user mode (ISL> hpux -is) no vi or pg editting ability from
single user mode. Booting into ISL> hpux -lm also results in a panic
and system crash. Some of the errors were......could not read all of
them or pause it......
system panic
kernel panic
not possible to find a process that caused the crash
failed to initailize
entry_init
status = -4
fstab corrupt
couldn't attach to /dev/dsk/c1t6d0 "these are the disks I removed
with SAM"
couldn't attach to /dev/dsk/c1t2d0
couldn't attach to /dev/dsk/c1t1d0
3. NIS problems between HPUX 10.20 and FreeBSD 3.0
4. Unable to start CDE desktop - cannot register service RPC ??
5. Problems with following sym links in HPUX 10.20
6. sharing the internet access using the network card
7. Apache compile problem under HPUX 10.20
8. DMA problems w/ PIIX3 IDE, 2.4.20-pre4-ac2
9. HPUX 10.20 sendmail problem.
10. Automounter map problems on hpux 10.20
12. X-server problems with C200, HPUX 10.20 ACE
13. Printing problem on HP9000, HPUX 10.20