boot disc

boot disc

Post by Rand » Wed, 14 Jan 1998 04:00:00



Can't I just boot FreeBSD from a boot disc like I do with Linux?
Is there any other way to boot FreeBSD other then the boot manager?

 
 
 

1. How to config LILO on non-boot disk (b4 using it as boot disk)

I recently bought a used Compaq 486/25SX for a home Linux box.  Installed
fine on original 170Meg drive.  I want to replace that drive (throw away
noisy & small old drive) with a spare 550Meg drive I have.  BIOS doesn't
recognize it, so I bought AMI's AMIDISK Extender, which allows recognition
of newer IDE drives.

I strapped the 550M drive as the master drive, popped in the AMI card, its
recognized, and the Linux install went OK, but when I boot, LILO gets
confused and stops at the  partial prompt "LI".

Now, how do I properly config lilo on that drive if I can't boot from that
drive?   I'm having a devil of a time getting my hands on a readable user's
guide for LILO.  I've got a linux laptop at work, but xdvi doesn't work and
a dvi->ascii filter I have won't grok that particular file.  

I believe I have to change lilo.conf on the 550Meg drive and then reinstall
lilo.

What I did was boot from the original 170 Meg drive, mounted the 550Meg
drive on  /mnt, and then did a chroot so bash thought that /dev/hdb1 was my
root dir.  Then I put the keyword 'linear' into /etc/lilo.conf, ran
/sbin/lilo, it told me it was updating Linux, then I shutdown, took out the
170Meg drive, restrapped the 550M drive as master and rebooted.  Still no
go.

Then I did the same thing, but this time I deleted the word 'linear' and
put in a section:
drive=/dev/hda
     sectors=63
     heads=16
     cylinders=1048

Still no go.   How can I confirm if the lilo in the MBR on the larger drive
is being updated?     I think my prob is that I'm not correctly updating
it.  Should be possible, after all, the original install boots off one
drive and installs LILO on another.   man lilo seems vague on this and I
can't find the complete lilo docs in a form that I can read.

thanks
(email appreciated)
--
Jay Heiser

http://www.mindspring.com/~pp001887

2. Socket Timeouts

3. *NEW* boot disk won't, *OLD* boot disk will!

4. MacOS-X to FBSD: How likely are commerical ports?

5. copy boot disc to a replacement boot disc -

6. Enable X11 Forwarding : How ? Not in X11 FAQs...

7. Starts x86 boot from AHA2940UW disk then says no boot disk

8. First boot after install, cant mount root

9. what different between boot disk, root disk and emergency disk???

10. Boot Disk, Rescue disk, Start-up Disk

11. Which boot disk goes with the Slackware 3.0 pcmcia.gz root disk?

12. 9Gbyte SCSI disc as boot disc with 1106 cylinders