Very Computer

by HK » Sun, 06 Jun 1999 04:00:00

ftp://ftp.asus.com.tw/pub/ASUS/mb/flash/icu_dos.zip

ftp://ftp.asus.com.tw/pub/ASUS/mb/flash/icu_win.zip

http://bahamut.mm.tu-tokyo.ac.jp/iwai/awedrv/

> I am trying to configure my SoundBlaster AWE32 but cant seem to get it
> right.

> I am running 3.2-RELEASE

> I have added to the KERNEL, the following,

> controller snd0
> device sb0 at isa? port 0x220 irq 5 driq 1 vector sbintr
> device opl0 at isa? port 0x388

> In Windows, It is set up as the following,

> IRQ 5
> DMA 01
> DMA 07
> I/O 0220-022F
> I/O 0300-0301
> I/0 0388-038B

> I have read all I can find and still cant seem to get it
> right, When I "dmesg" I get the following errors.

> sb_reset_dsp failed
> sb0 not found at 0x220
> opl0 not found at 0x388

> Can anyone please help me. I have been trying for days now just
> searching and reading.

> ANYONE????

> Jamie

by **Lars Koell** » Mon, 14 Jun 1999 04:00:00

> ftp://ftp.asus.com.tw/pub/ASUS/mb/flash/icu_dos.zip

> ftp://ftp.asus.com.tw/pub/ASUS/mb/flash/icu_win.zip

> http://bahamut.mm.tu-tokyo.ac.jp/iwai/awedrv/

>> I am trying to configure my SoundBlaster AWE32 but cant seem to get it
>> right.

>> I am running 3.2-RELEASE

>> I have added to the KERNEL, the following,

>> controller snd0
>> device sb0 at isa? port 0x220 irq 5 driq 1 vector sbintr
>> device opl0 at isa? port 0x388

>> In Windows, It is set up as the following,

>> IRQ 5
>> DMA 01
>> DMA 07
>> I/O 0220-022F
>> I/O 0300-0301
>> I/0 0388-038B

>> I have read all I can find and still cant seem to get it
>> right, When I "dmesg" I get the following errors.

>> sb_reset_dsp failed
>> sb0 not found at 0x220
>> opl0 not found at 0x388

I have an AWE32 succesfully running since months! FIrst of all make the
following entrys in your kernel config file (I try to adapt to your settings
mentioned above):

#
# flags 0x7 chooses secondary DMA channel
# (bit 2..0 secondary DMA channel in flags)
#
# awe0 before opl0 is important!
#
controller snd0
device sb0 at isa? port 0x220 irq 5 drq 1 flags 0x7
device sbxvi0 at isa? drq 7
device sbmidi0 at isa? port 0x300
device awe0 at isa? port 0x620
device opl0 at isa? port 0x388

The second changes are the PNP settings during boot:

/boot/loader.rc:

load /kernel
load -t userconfig_script /boot/kernel.conf
autoboot 5

/boot/kenel.conf:

pnp 1 0 os enable irq0 5 drq0 1 drq1 7 port0 0x220 port1 0x300 port2 0x388
pnp 1 1 os disable
pnp 1 2 os enable port0 0x620 port1 0xa20 port2 0xe20
pnp 1 3 os disable

Have fun!

Regards

Lars
--
E-Mail: | Lars Koeller

PGP-key: | University of Bielefeld
http://www.nic.surfnet.nl/pgp/pks-toplev.html | Germany
----------- FreeBSD, what else? ---- http://www.freebsd.org -------------

by **Dark Fib** » Tue, 15 Jun 1999 04:00:00

>I have an AWE32 succesfully running since months! FIrst of all make the
>following entrys in your kernel config file (I try to adapt to your settings
>mentioned above):

everything on my awe32 works great except the wavetable engine ;)
weird. the sb, opl etc all init and work fine. but it fails to
'detect' the emu8k engine at base 0x620

i've given up on it. works fine in dos + windows + linux. <shrugs>

-df

Main Homepage
http://homepages.ihug.com.au/~entropy
[FAQ] Write Your Own OS
http://homepages.ihug.com.au/~entropy/os/
3x3 Eyes Fan Fiction Archive
http://www.geocities.com/Tokyo/Ginza/7478
Sarien Sierra Emulator
http://homepages.ihug.com.au/~entropy/agi/

Very Computer

SoundBalster

SoundBalster

SoundBalster

SoundBalster