Very Computer

Can anybody help me?

I have 2.2.1 installed on my 486 33, but the mouse an ATI mouse connected to a
ATI VGA Wonder XL video card.  The mouse is set to irq 5 0x23c. I have a SB16
also on irq5, but support for it is not install in the kernal, yet.  I am going
to try removing the SB for now.

The problem is the mouse will not work in XFree86.  Xwindows comes ups, I can
change video modes with Ctrl-Alt-+ but the mouse does not work.

HELP, support for mse0 is in the kernal, the config of the kernal is set to
irq5 port 0x23c, and no mouse.  I can't even get the mouse to work in the
/stand/sysinstall XFree86 config program.

Any and all help is apperciated!
Derek
===============================================================================
Derek Cole                | ...maximize Acceleration in the desired direction
                          |  
Nova Crystals Ltd         |
Halifax, Nova Scotia, CA  | HTTP://www.tuns.ca/~coleda/
===============================================================================

coleda>>I have 2.2.1 installed on my 486 33, but the mouse an ATI mouse connected to a
coleda>>ATI VGA Wonder XL video card.  The mouse is set to irq 5 0x23c. I have a SB16
coleda>>also on irq5, but support for it is not install in the kernal, yet.  I am going
coleda>>to try removing the SB for now.
coleda>>
coleda>>The problem is the mouse will not work in XFree86.  Xwindows comes ups, I can
coleda>>change video modes with Ctrl-Alt-+ but the mouse does not work.
coleda>>
coleda>>HELP, support for mse0 is in the kernal, the config of the kernal is set to
coleda>>irq5 port 0x23c, and no mouse.  I can't even get the mouse to work in the
coleda>>/stand/sysinstall XFree86 config program.

The ATI card usually comes with a utility program to set up the card.
You can enable/disable the mouse interface and set the port and IRQ
number of the bus mouse port on the card with the utility program. I
think you can set the port number to 23c or 238, and choose an IRQ
number from 2, 3, 5 and 10. My ATI Graphics Ultra+ (ISA) offers that
many.

Kazu

coleda>>I have 2.2.1 installed on my 486 33, but the mouse an ATI mouse connected to a
coleda>>ATI VGA Wonder XL video card.  The mouse is set to irq 5 0x23c. I have a SB16
coleda>>also on irq5, but support for it is not install in the kernal, yet.  I am going
coleda>>to try removing the SB for now.
coleda>>
coleda>>The problem is the mouse will not work in XFree86.  Xwindows comes ups, I can
coleda>>change video modes with Ctrl-Alt-+ but the mouse does not work.
coleda>>
coleda>>HELP, support for mse0 is in the kernal, the config of the kernal is set to
coleda>>irq5 port 0x23c, and no mouse.  I can't even get the mouse to work in the
coleda>>/stand/sysinstall XFree86 config program.

The ATI card usually comes with a utility program to set up the card.
You can enable/disable the mouse interface and set the port and IRQ
number of the bus mouse port on the card with the utility program. I
think you can set the port number to 23c or 238, and choose an IRQ
number from 2, 3, 5 and 10. My ATI Graphics Ultra+ (ISA) offers that
many.

Kazu