network card

network card

Post by Bruce Goldstei » Wed, 10 Jun 1998 04:00:00



Hi,

I have an intel 10/100 PCI network card and would like to run it in full
duplex mode.  Where do I tell the OS to do so?

Thanks.

 
 
 

network card

Post by Mike Tanc » Thu, 11 Jun 1998 04:00:00


On Tue, 9 Jun 1998 18:11:13 -0500, "Bruce Goldstein"


>Hi,

>I have an intel 10/100 PCI network card and would like to run it in full
>duplex mode.  Where do I tell the OS to do so?

In /etc/rc.conf

e.g.

ifconfig_fxp0="inet 192.168.100.1  netmask 255.255.255.252 media
100basetx mediaopt full-duplex"  

        ---Mike

 
 
 

1. 3C905 Network Card detected as a Vortex Network Card (3c59X series)

    I have a problem in connecting my Linux Server. I already had a
linux server working and
was planning to add a newer machine to replace it. In the new machine, I
had a 3c905
network card (Boomerang Series) but RedHat detects it as a Vortex Series
Network card
(3c59x). I continued on with the installation and  connected the 2 Linux
machines in a hub.
However, when I tried to check the connection using the ping command,
time-out error
occurred. Is it because of wrong detection of network or something else?
Any help would be
greatly appreciated.

Thanks

PS. Please reply to my e-mail address if possible. I might not be able
to get the answer on
time if posted in the Usenet.

2. X Problems

3. testing network card without being connected to a network?

4. RH5.1 sparc PPP won't work/minicom does

5. Network error or Network card error?

6. KDE2.2/Konqueror/Validator

7. A Linux in Two Networks Throug the same Network Card?, HOW TO CONNECT

8. UDMA Problem with Apollo Pro 133A

9. 3Com network card cannot see network

10. 2 network cards, different networks

11. two network cards, two(?) networks, one computer...

12. Networking without network card

13. Network install of RedHat 6.1 with a PCMCIA Network Card?