Very Computer

by **Andrzej Sydork** » Sat, 12 May 2001 05:08:46

Tried to set up squid 2.3 and 2.4 without any luck.
Every time I start squid the child exits on signal 6.
Here is a sample logentry.

---
2001/05/10 19:10:18| WCCP Disabled.
FATAL: Received Segment Violation...dying.
2001/05/10 19:10:18| Not currently OK to rewrite swap log.
2001/05/10 19:10:18| storeDirWriteCleanLogs: Operation aborted.
CPU Usage: 0.100 seconds = 0.046 user + 0.054 sys
Maximum Resident Size: 5728 KB
Page faults with physical i/o: 0
---
Last time I had squid running was on 4.2. Now I'm runing 4.3.
The squid.conf was quite minimal, until I gave up and deleted the whole
package. Now it's unlinked and I can't read it any more =)
I hope to get some tips here and give it another try. For a while I started
considering going back to Linux.

Some stuff I tried:
Recompiling with various options, including configure options as seen in
ports makefile.
Tried disable soft-updates on cache-partition.
Swapping some memory.
Stock source install as well as ports install.
Various prayers.

Configuration:
SMP
64-256 MB ram
IBM lvd on AIC 7890

by **mic..** » Sat, 12 May 2001 16:51:33

> Tried to set up squid 2.3 and 2.4 without any luck.
> Every time I start squid the child exits on signal 6.
> Here is a sample logentry.

I have squid running on a 4.3 box on a softupdates partition with 0
problem. I don't remember the version number of squid. It was
installed from packages 6 months ago.

--
Michel Talon

by **Andrzej Sydork** » Sat, 12 May 2001 23:33:38

> > Tried to set up squid 2.3 and 2.4 without any luck.
> > Every time I start squid the child exits on signal 6.
> > Here is a sample logentry.

> I have squid running on a 4.3 box on a softupdates partition with 0
> problem. I don't remember the version number of squid. It was
> installed from packages 6 months ago.

> --
> Michel Talon

Then any OS specific issues are ruled out since it is running on 4.3 for
some people.
It meens that there's something wrong with my setup. Or maybe it could be
smp related.
Unfortuantly it's hard to find anything usefull on this matter on the web.
Still hoping on some hints from here.

By the way, forgot to mention, its a i386 system.

by **mic..** » Sun, 13 May 2001 00:22:09

>> > Tried to set up squid 2.3 and 2.4 without any luck.
>> > Every time I start squid the child exits on signal 6.
>> > Here is a sample logentry.

>> I have squid running on a 4.3 box on a softupdates partition with 0
>> problem. I don't remember the version number of squid. It was
>> installed from packages 6 months ago.

>> --
>> Michel Talon
> Then any OS specific issues are ruled out since it is running on 4.3 for
> some people.
> It meens that there's something wrong with my setup. Or maybe it could be
> smp related.
> Unfortuantly it's hard to find anything usefull on this matter on the web.
> Still hoping on some hints from here.
> By the way, forgot to mention, its a i386 system.

It is squid 2.3 by the way. The system is an Athlon.

--
Michel Talon

Very Computer

squid problem

squid problem

squid problem

squid problem

squid problem