Installing fbsd 3.2 with onboard scsi ncr 53c810

Installing fbsd 3.2 with onboard scsi ncr 53c810

Post by Harry Grube » Wed, 18 Aug 1999 04:00:00



Hello,
I got a big problem installing fbsd 3.2 on a 486dx2 66 with onboard scsi
ncr 53c810 contr.
the boot.flp doesn't recognize the controller!
how could I load the kernelmod ncr0 at boot time or how
can I compile a new kernel without an existing/running fbsd 3.2!
thanx
 
 
 

Installing fbsd 3.2 with onboard scsi ncr 53c810

Post by n.. » Thu, 19 Aug 1999 04:00:00



> I got a big problem installing fbsd 3.2 on a 486dx2 66 with onboard
> scsi ncr 53c810 contr.
> the boot.flp doesn't recognize the controller!
> how could I load the kernelmod ncr0 at boot time or how
> can I compile a new kernel without an existing/running fbsd 3.2!

It should work.  I was able to install FBSD 3.2 on either of my systems
with a 53C875 (one is a geniune Symbios Logic, the other a Tekram
DC-390F).  No problems.  Check for IRQ conflicts.  What's your dmesg
say?  Alt-F2 should bring you to the diag messages.

If everything is fine with the onboard 53C810, it should show up in your
dmesg.
--

JCA

Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.

 
 
 

1. Comments on JBOND 486 66 Main board w/onboard (VLB) NCR 53c810 SCSI HD ?

I'm considering the purchase of the following for a Linux system:

        J-BOND VESA/ISA/PCI 486/66 Main Board w/on-board SCSI controller

..the SCSI on board is based on the NCR53c810 chip. I'm assuming I can use the
53c7,8xx SCSI driver w/no problem. The doc claims that the on-board
53C810 is addressed just like one on a VL-bus based card...


2. Write files from CGI-execs ?

3. LILO and 3.2 G SCSI (NCR controller) - weird behavior

4. any news on spreadsheets ?

5. Problem with NCR 53c810 SCSI

6. UK supplier for intellient serial board ?

7. NCR 53c810 PCI-SCSI wants IRQ 0?

8. Is there a new termcap library?

9. SCSI CHIP NCR 53C810 Support ?

10. NCR 53c810 SCSI card

11. driver for NCR SCSI 53c810 chip

12. NCR 53C810 SCSI card

13. NCR PCI 53c810 SCSI controller works in LInux ????