Upgrading to 4.8: buildworld fails

Upgrading to 4.8: buildworld fails

Post by Vadim K » Sun, 22 Jun 2003 06:07:54



Have you updateted all the sources by CVSup (src-all) or only some of
them???

/** Vadim*/



Quote:> I'm upgrading from 4.7-RELEASE -> 4.8-RELEASE.

> CVSupped the sources, started "make buildworld". Everything runs fine
> for quite a while, but then, in stage 4 it crashes:

> building static m library
> ranlib libm.a
> cc -fpic -DPIC -O -pipe  -D_IEEE_LIBM -D_ARCH_INDIRECT=i387_  -c

/usr/src/lib/msun/src/e_acos.c -o e_acos.So
Quote:> cc -fpic -DPIC -O -pipe  -D_IEEE_LIBM -D_ARCH_INDIRECT=i387_  -c

/usr/src/lib/msun/src/e_acosf.c -o e_acosf.So
Quote:

> ....

> cc -fpic -DPIC -O -pipe  -D_IEEE_LIBM -D_ARCH_INDIRECT=i387_  -c

/usr/src/lib/msun/src/s_cbrtf.c -o s_cbrtf.So
Quote:> cc -fpic -DPIC -O -pipe  -D_IEEE_LIBM -D_ARCH_INDIRECT=i387_  -c

/usr/src/lib/msun/src/s_ceil.c -o s_ceil.So
Quote:> /usr/obj/usr/src/i386/usr/libexec/elf/ld: final link failed: File too
large
> *** Error code 1

> There is enough space on my HD and RAM also (196 MB), almost no
> swapping during compilation.

> Any ideas, how I could solve that?

 
 
 

Upgrading to 4.8: buildworld fails

Post by William Clard » Mon, 23 Jun 2003 22:11:52




Quote:>I'm upgrading from 4.7-RELEASE -> 4.8-RELEASE.

>CVSupped the sources, started "make buildworld". Everything runs fine
>for quite a while, but then, in stage 4 it crashes:

>building static m library
>ranlib libm.a
>cc -fpic -DPIC -O -pipe  -D_IEEE_LIBM -D_ARCH_INDIRECT=i387_  -c /usr/src/lib/msun/src/e_acos.c -o e_acos.So
>cc -fpic -DPIC -O -pipe  -D_IEEE_LIBM -D_ARCH_INDIRECT=i387_  -c /usr/src/lib/msun/src/e_acosf.c -o e_acosf.So

>....

>cc -fpic -DPIC -O -pipe  -D_IEEE_LIBM -D_ARCH_INDIRECT=i387_  -c /usr/src/lib/msun/src/s_cbrtf.c -o s_cbrtf.So
>cc -fpic -DPIC -O -pipe  -D_IEEE_LIBM -D_ARCH_INDIRECT=i387_  -c /usr/src/lib/msun/src/s_ceil.c -o s_ceil.So
>/usr/obj/usr/src/i386/usr/libexec/elf/ld: final link failed: File too large
>*** Error code 1

>There is enough space on my HD and RAM also (196 MB), almost no
>swapping during compilation.

>Any ideas, how I could solve that?

Try checking how full your disk is (i.e., run "df -k").

 
 
 

1. linux-j2sdk 1.4.2 fail on 4.8

Hi, i tried to help one poor soul to install
native java on FreeBSD 4.8-stable,
the linux bootstrap installed well but didn't work:

<stakys> su-2.05b# /usr/local/linux-sun-jdk1.4.2/bin/java -version
<stakys> #
<stakys> # HotSpot Virtual Machine Error, Internal Error
<stakys> # Please report this error at
<stakys> # http://java.sun.com/cgi-bin/bugreport.cgi
<stakys> #
<stakys> # Java VM: Java HotSpot(TM) Client VM (1.4.2-b28 mixed mode)
<stakys> #
<stakys> # Error ID: 4F533F4C494E55580E43505001C9
<stakys> #
<stakys> Heap at VM Abort:
<stakys> Heap[now the process hangs forever]

The linux-1.4.1_02-b06 works without any problem (on the same box).

regards

--
Marcin Gryszkalis
http://fork.pl
<><

_______________________________________________

http://lists.freebsd.org/mailman/listinfo/freebsd-java

2. XF86_S3: Cannot find RGB_DB!

3. diskless: FBSD 5.1 fails, 5.0 and 4.8 do it

4. major delay establishing connection

5. Upgrading from 4.1.1-RELEASE to 4.8-STABLE [HOWTO]

6. ppp-2.3.4 or 5 breaks kernel ppp.c

7. After upgrade from 4.7 to 4.8-RC top sucks

8. FTP Library

9. Upgrading to 4.8 Release

10. Is "make -k buildworld" equal to "make buildworld" the first time run?

11. Is "make -k buildworld" equal to "make buildworld" the first time run

12. Is "make -k buildworld" equal to "make buildworld" the first time

13. 3.1-STABLE make buildworld fails durring gnu/usr.bin/bc