by Jeffrey Patrici » Fri, 09 Oct 1998 04:00:00
ncr0: regdump: da 00 00 9d 47 0f 06 07 35 08 86 00 80 00 0f 02.
ncr0: restart (fatal error).
sd0(ncr0:6:0): WIDE SCSI (16 bit) enabled
sd0(ncr0:6:0): 40.0 MB/s (50 ns, offset 15)
What is my machine doing? I have a Tekram 390F and an IBM DCAS34330...
Any ideas? Thanks..
- Jeff
After adding a Fujitsu 230MB magneto optical drive via the
od0 device driver, I started getting the following SCSI
errors. It sounds as if the od driver doesn't give the
drive enough time to spin up, so it times out and reissues
the command. After four or five attempts, it usually aborts
and prints "input/output error", though sometimes the kernel
locks up hard.
Can anyone speculate as to what might be happening? Better
yet, can anyone suggest a course of action?
I'm using an NCR 53C810-based card, with a Quantum drive
at ID 0 and the Fujitsu at ID 1. The kernel is 2.1R.
Thanks.
-David.
/kernel: script cmd = 910a0000
/kernel: reg: da 10 80 13 47 88 01 1f 01 08 80 2a 80 00 0a 00.
/kernel: ncr0: handshake timeout
/kernel: script cmd = 910a0000
/kernel: reg: da 10 80 13 47 88 01 1f 01 08 00 2a 80 00 0a 00.
/kernel: ncr0: handshake timeout
/kernel: od0(ncr0:1:0): 200ns (5 Mb/sec) offset 8.
/kernel: script cmd = 910a0000
/kernel: reg: da 10 80 13 47 88 01 1f 01 08 00 2a 80 00 02 00.
/kernel: ncr0: handshake timeout
/kernel: script cmd = 910a0000
/kernel: reg: da 10 80 13 47 88 01 1f 01 08 00 2a 80 00 02 00.
/kernel: ncr0: handshake timeout
/kernel: od0(ncr0:1:0): 200ns (5 Mb/sec) offset 8.
/kernel: script cmd = 910a0000
/kernel: reg: da 10 80 13 47 88 01 1f 01 08 00 2a 80 00 02 00.
/kernel: ncr0: handshake timeout
3. ncr0:timeout
4. Another 3Com 3c509 Question - Sorry !
5. Help! HD problems, ncr0: no ccb
6. Adding disk drives to Solaris 2.3 (Sparc)
7. page faults, kernel BUG, no swap usage and other wierdness
8. Linux Counter: 93688 registered Linux users
10. scsi disk problem or kernel wierdness
11. PPP wierdness
12. Apache Jserv installation wierdness
13. Apache 1.3.0 Linux VirtualHost wierdness