HELP!! - bad magic number in super-block.

HELP!! - bad magic number in super-block.

Post by Edward Va » Thu, 26 May 1994 22:20:04



Got the following error message today:

   e2fsck 0.4a, 93/11/29 for EXT2 FS 0.4a 93/11/19
   /dev/hda1 is clean, no check
   e2fsck 0.4a, 93/11/29 for EXT2 FS 0.4a 93/11/19
   fsck.ext2: bad magic number in super-block
   Fsck failed. Please reboot

There are two partitions on the IDE drive:

   /dev/hda1    linux native 83
   /dev/hda2    linux swap 82

I've tried reconstructing the filesystem from backups but I still get this
error.  Switching to a new hard disk didn't help.
I'd really appreciate ANY help.

ADVthanksANCE,
--

Software Engineer, CAD/CAM Technology
de Havilland Inc.                               OFFICE:   (416) 375-3084
Garratt Boulevard MS N02-10                     FAX:      (416) 375-4511
Downsview, Ontario
CANADA M3K 1Y5

 
 
 

1. Bad magic number in super-block / Group descriptors look bad

Hi,

Ever found yourself in this situation ?
You've had a power-failure or just did something very bad with your
harddisk
and now when trying to mount it fsck screams:

Group descriptors look bad... trung backup blocks....
/sbin/e2fsck: Bad magic number in super-block while trying to open
/dev/hdb1

I've had this problem 2 times before now, and i've had a hell of a
time finding any docs related. I DID eventually find this:
(Note: text below is copy-pasted together from several articles, and
so not
 written by myself...)

----- begin of article pastes ----------------

From MANPAGES of mke2fs:

-S
Write superblock and group descriptors only. This is useful if all of
the superblock and backup superblocks are corrupted,
 and a last-ditch recovery method is desired. It causes mke2fs to
reinitialize the superblock and group descriptors, while not
 touching the inode table and the block and inode bitmaps. The e2fsck
program should be run immediately after this option is used,
 and there is no guarantee that any data will be salvageable.

Ofcourse you're should only try this when you've exhausted all other
options.
Other options are:

fsck -b 32 /dev/hdb1  (use the first backup super-block)

To determine the locations of the backup superblocks:
# newfs -N /dev/r

    Caution: Use the "N" option. If the "n" option is used, the
filesystem
             may be destroyed.

Example using fsck on a backup superblock:

     /dev/rsd1a:   204540 sectors in 974 cylinders of 6 tracks, 35
sectors
     104.7MB in 61 cyl groups (16 c/g, 1.72MB/g, 768 i/g)
     super-block backups (for fsck -b #) at:
     32, 3440, 6848, 10256, 13664, 17072, 20480, 23888, 26912,
     30320, 33728, 37136, 40544, 43952, 47360, 50768, 53792, 57200,
     60608, 64016, 67424, 70832, 74240, 77648, 80672, 84080, 87488,
     90896, 94304, 97712, 101120, 104528, 107552, 110960, 114368,
117776,
     121184, 124592, 128000, 131408, 134432, 137840,141248, 144656,
148064,
     151472, 154880, 158288, 161312, 164720, 168128, 171536, 174944,
178352,
     181760, 185168, 188192, 191600, 195008, 198416, 201824,

         In this example, 201824 is the last backup superblock
location
         198416 is the next to last backup superblock location.

------------- end of article pastes --------------
Also it's interesting to note that it seems the larger the disk
the less backup super-block are stored.. I my case, on a 40 GB Maxtor:

32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632,
2654208, 4096000

where the only backups, (the newfs command mentioned above, was not
installed here, and i could not find it anywhere) i learned this only
after mk2fs told me after it had written the new super-block to my
disk...

Hope this helpes some people !

Best regards,

Jan Wilmans

2. USENIX Annual Tech - Additions to Program and Savings Deadline is here

3. Bad magic number in super-block (help!)

4. i hosed my Dos superblock, can I retrieve any data?

5. Error when booting; bad magic number in super-block; please help!

6. Mandrake 9.1 first time linux user

7. Newbie: Bad magic number in super-block

8. .forward again

9. bad magic number in super-block

10. e2fsck: bad magic number in super-block

11. Bad magic number in super-block

12. Bad magic number in super-block ?

13. bad magic number in super-block