IN-2000 SCSI Controller?

IN-2000 SCSI Controller?

Post by Mark Alls » Sun, 19 Sep 1993 00:18:43



   I would like to take the Linux plunge but before I do it seems wise to
validate some of my hardware. I've checked the compatibility lists and
can't find the Always IN-2000 SCSI controller card listed. Does this
mean I'm out of luck? Any information will greatly appreciated.

--
??   C. Mark Allsop               Disclaimer: The opinions and     ??
??   Chevron Petr. Tech. Co.      statements made herein are my    ??
??   P.O. Box 39100               own; the managment of Chevron     ??
??   Lafayette, La.  70593        probably couldn't care less.     ??
??   (318) 989-3152                                                ??

 
 
 

1. Always IN-2000 SCSI Controller problem

I've got a copy of the Yggdrasil distribution (CD labeled Fall 1994). My
VLB 486DX2-66 has an Always IN-2000 SCSI controller card, which is listed
as "experimental" in the Linux "hardware compatibility" section. When
attempting to install this "Plug-and-Play" distribution, it gets to the part
where it tries to determine the system configuration and gets stuck in an
endless loop repeatedly displaying the following error messages:

scsi : aborting command due to timeout : pid 39, scsi0, id 2, lun 0 0x08 00
00 00 00 00
in2000_abort
SCSI host 0 abort() timed out - resetting
Unable to reset scsi host 0 - probably a scsi bus hang.

The pid and lun values constantly toggle back and forth between 39/40 and
0x08 00 00 00 00 00 <=> 0x08 00 00 00 02 00, respectively.
Anybody else out there have problems with the Always IN-2000 SCSI controller?
Any ideas at to what the problem is and how to correct it?

                        Steve Rapinchuk

                        (408) 746-6408

2. Append to a Line in Sed

3. Yggdrasil install problem w/ IN-2000 SCSI controller

4. Apache problem with MSIE 5.0

5. Always IN-2000 scsi hd controller card probs -w- LILO/BOOT in Linux

6. how can i compile shared library using gcc?

7. SCSI bus hangs on a IN-2000 SCSI

8. Let's do something about ... BORLAND !!!

9. IN-2000 & SCSI CD-ROM, Promise 2300+ & IDE HD

10. Always IN-2000 SCSI card

11. Always IN-2000 SCSI Card

12. LINUX won't recognize in-2000 SCSI

13. IN-2000 SCSI ALWAYS Slackware Boot Disk Not Working