XF86Config for Diamond Stealth 64 PCI

XF86Config for Diamond Stealth 64 PCI

Post by Philippe Paill » Tue, 22 Nov 1994 19:47:41



Here is a XF86Config file for Stealth 64 PCI 2Mo Vram. I hope it will be OK
on your system. The major problem was that RamDac was not specified.

Start copying after that line :

#
# Copyright (c) 1994 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

    RgbPath     "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)

    FontPath    "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath    "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath    "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath    "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath    "/usr/X11R6/lib/X11/fonts/100dpi/"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    NoTrapSignals

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence

#    DontZap

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "Keyboard"

    Protocol    "Standard"

# when using XQUEUE, comment out the above line, and uncomment the
# following line

#    Protocol   "Xqueue"

    AutoRepeat  500 5
    ServerNumLock

# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Xleds      1 2 3

# To set the LeftAlt to Meta, RightAlt key to ModeShift,
# RightCtl key to Compose, and ScrollLock key to ModeLock:

#    LeftAlt     Meta
#    RightAlt    ModeShift
#    RightCtl    Compose
#    ScrollLock  ModeLock

EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "Pointer"
    Protocol    "MouseSystems"
    Device      "/dev/mouse"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Protocol   "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice

#    BaudRate   9600
#    SampleRate 150

# Emulate3Buttons is an option for 2-button Microsoft mice

    Emulate3Buttons

# ChordMiddle is an option for some 3-button Logitech mice

#    ChordMiddle

EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "Deawoo"
    VendorName  ""
    ModelName   "Crystal 15XQm"

# Bandwidth is in MHz unless units are specified

    Bandwidth   75.0

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31-60         # multisync

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-90

# Modes can be specified in two formats.  A compact one-line format, or
# a multi-line format.

# These two are equivalent

#    ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace

#    Mode "1024x768i"
#        DotClock       45
#        HTimings       1024 1048 1208 1264
#        VTimings       768 776 784 817
#        Flags          "Interlace"
#    EndMode

#
# VESA 1024x768@60Hz Non-Interlaced mode
# Horizontal Sync = 48.4kHz
# Timing: H=(0.12us, 2.22us, 2.58us) V=(0.06ms, 0.12ms, 0.60ms)
#
#          name        clock   horizontal timing     vertical timing      flags
Modeline "1024x768"    65     1024 1032 1176 1344    768  771  777  806 -hsync -vsync

#
# VESA 800x600@72Hz Non-Interlaced mode
# Horizontal Sync = 48kHz
# Timing: H=(1.12us, 2.40us, 1.28us) V=(0.77ms, 0.13ms, 0.48ms)
#
#          name        clock   horizontal timing     vertical timing      flags
Modeline "800x600"     50      800  856  976 1040    600  637  643  666  +hsync +vsync

# VESA 640x480@72Hz Non-Interlaced mode
# Horizontal Sync = 37.9kHz
# Timing: H=(0.76us, 1.27us, 4.06us) V=(0.24ms, 0.079ms, 0.74ms)
#
#          name        clock   horizontal timing     vertical timing      flags
Modeline "640x480"     31.5    640  664  704  832    480  489  492  520

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
    Identifier  "myVideocard"
    VendorName  ""
    BoardName   "Diamond Stealth 64 PCI"
    VideoRam    2048
    Clockchip "icd2061a"
    RamDac   "Bt485"

EndSection

# The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32)

Section "Screen"
    Driver      "accel"
    Device      "myVideocard"
    Monitor     "Deawoo"
    Subsection "Display"
        Depth       16
        Modes       "1024x768"  "800x600" "640x480"
        ViewPort    0 0
        Virtual     1024 768
    EndSubsection
    Subsection "Display"
        Depth       8
        Modes       "1024x768"
        ViewPort    0 0
        Virtual     1024 768
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes       "640x480" "800x600"
        ViewPort    0 0
        Virtual     800 600
    EndSubsection
EndSection

# **************************************************************************

 
 
 

XF86Config for Diamond Stealth 64 PCI

Post by David Hedl » Fri, 25 Nov 1994 20:25:29


: Here is a XF86Config file for Stealth 64 PCI 2Mo Vram. I hope it will be OK
: on your system. The major problem was that RamDac was not specified.

: Section "Device"
:     Identifier  "myVideocard"
:     VendorName  ""
:     BoardName   "Diamond Stealth 64 PCI"
:     VideoRam    2048
:     Clockchip "icd2061a"
:     RamDac   "Bt485"

You might want to add: option "dac_8_bit"
to the above, to get a proper 24 bit palette instead of the usual VGA 18
bit palette

David
--

+--------------------------------------------------------------------------+

| Computer Graphics Group                | and all computers are lousy     |
| University of Bristol                  | actors                          |
| England                                |                       - Anon    |
|          *** All opinions expressed are mine and mine alone ***          |
+--------------------------------------------------------------------------+

 
 
 

XF86Config for Diamond Stealth 64 PCI

Post by Robert Stockma » Tue, 29 Nov 1994 00:10:51


Ok here is a working XF86Config file for the DIAMOND STEALTH 64 PCI 2MB VRAM
card...

----------------------------snip here-------------------------------------
# File generated by xf86config.

#
# Copyright (c) 1994 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

    RgbPath     "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)

    FontPath    "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath    "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath    "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath    "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath    "/usr/X11R6/lib/X11/fonts/100dpi/"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    NoTrapSignals

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence

#    DontZap

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "Keyboard"

    Protocol    "Standard"

# when using XQUEUE, comment out the above line, and uncomment the
# following line

#    Protocol   "Xqueue"

    AutoRepeat  500 5
    ServerNumLock

# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Xleds      1 2 3

# To set the LeftAlt to Meta, RightAlt key to ModeShift,
# RightCtl key to Compose, and ScrollLock key to ModeLock:

#    LeftAlt     Meta
#    RightAlt    ModeShift
#    RightCtl    Compose
#    ScrollLock  ModeLock

EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "Pointer"
    Protocol    "MouseSystems"
    Device      "/dev/mouse"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Protocol   "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice

#    BaudRate   9600
#    SampleRate 150

# Emulate3Buttons is an option for 2-button Microsoft mice

#    Emulate3Buttons

# ChordMiddle is an option for some 3-button Logitech mice

#    ChordMiddle

EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "myMoni"
    VendorName  "Idek liyama"
    ModelName   "Vision Master 17"

# Bandwidth is in MHz unless units are specified

    Bandwidth   65.0

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5,35.2,35.5,37.86,48.1,48.36

# I only have a Philips 4CM5279 14" monitor, which has only fixed horizontal
# sync frequencies...The two numbers behind the comma in the last three ones:
# I really needed that accuracy, the Philips manual gave only one digit behind
# the comma....I found the missing digits by running
# X -pn -probeonly > /tmp/out...
#    HorizSync  30-64         # multisync
#    HorizSync  31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync  15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 56-87

# Modes can be specified in two formats.  A compact one-line format, or
# a multi-line format.

# These two are equivalent

#    ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace

#    Mode "1024x768i"
#        DotClock       45
#        HTimings       1024 1048 1208 1264
#        VTimings       768 776 784 817
#        Flags          "Interlace"
#    EndMode

#
# VESA 1024x768@60Hz Non-Interlaced mode
# Horizontal Sync = 48.4kHz
# Timing: H=(0.12us, 2.22us, 2.58us) V=(0.06ms, 0.12ms, 0.60ms)
#
#  name        clock   horizontal timing     vertical timing      flags
Modeline "1024x768"    65     1024 1032 1176 1344    768  771  777  806 -hsync -vsync

#
# 1024x768@60Hz Non-Interlaced mode (non-standard dot-clock)
# Horizontal Sync = 48.4kHz
# Timing: H=(0.65us, 2.84us, 0.65us) V=(0.12ms, 0.041ms, 0.66ms)
#
# name        clock   horizontal timing     vertical timing      flags
Modeline "1024x768"    62     1024 1064 1240 1280   768  774  776  808

#
# VESA 800x600@72Hz Non-Interlaced mode
# Horizontal Sync = 48kHz
# Timing: H=(1.12us, 2.40us, 1.28us) V=(0.77ms, 0.13ms, 0.48ms)
#
#          name        clock   horizontal timing     vertical timing      flags
Modeline "800x600"     50      800  856  976 1040    600  637  643  666  +hsync +vsync

# VESA 640x480@72Hz Non-Interlaced mode
# Horizontal Sync = 37.9kHz
# Timing: H=(0.76us, 1.27us, 4.06us) V=(0.24ms, 0.079ms, 0.74ms)
#
#          name        clock   horizontal timing     vertical timing      flags
Modeline "640x480"     31.5    640  664  704  832    480  489  492  520

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
    Identifier  "myVideocard"
    VendorName  "miro"
    BoardName   "Crystal 20SV"
    VideoRam    2048
    Chipset "s3_generic"
    Clockchip "icd2061a"
#    Option "dac_8_bit"

EndSection

# The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32)

Section "Screen"
    Driver      "accel"
    Device      "myVideocard"
    Monitor     "myMoni"
    Subsection "Display"
        Depth       16
        Modes       "1024x768"  "800x600" "640x480"
        ViewPort    0 0
        Virtual     1024 1020
    EndSubsection
    Subsection "Display"
        Depth       8
#        Modes       "640x480" "800x600" "1024x768" "1280x1024"
        Modes       "1024x768"  "800x600" "640x480"
        ViewPort    0 0
        Virtual     1600 1200
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes       "640x480" "800x600"
        ViewPort    0 0
        Virtual     800 600
    EndSubsection
EndSection
---------------------------snip here------------------------------------

Robert
--
++-------------------------++------------------------------------------++
|| R.M. Stockmann          ||   Delft University of Technology         ||
|| st...@dutsh7.tudelft.nl ||   Department of Chemical Engineering     ||
|| phone: +31 15  784395   ||   Section Industrial Catalysis           ||
|| home:  +31 1620 36177   ||   Julianalaan 136                        ||
|| fax:   +31 17  784452   ||   2628 BL Delft  The Netherlands         ||
++-------------------------++------------------------------------------++