Xconfig for Compaq QVision and NEC 4FGe

Xconfig for Compaq QVision and NEC 4FGe

Post by Jake Colm » Sun, 12 Jun 1994 03:52:03



The best I can get with my setup is 640x480.  SuperProbe says that I have the
Compaq QVision/1024; the X-Server says I have the cpq_avga.  Has anyohe had better
success with this configuration?

Thanx!

...Jake

 
 
 

1. Solved: trying to get Compaq QVISION card and mouse working (was NEC 4FGe problem)

I was able to get this setup working quite well.  The mouse is
a PS/2 mouse.  I set /dev/mouse to be a symbolic link to /dev/bmouseps2.
The other relevant parts of the XF86Config file follow.
Note the commented out lines in the monitor
section -- these were taken from one of the example XF86config
files -- they were supposed to work for an NEC4FGe, but they
did NOT.  I used the ModeLine's for the NEC4FG, and these worked
fine.

Section "Device"
    Identifier  "Compaq QVision/1024"
    VendorName  "Unknown"
    BoardName   "Unknown"
#    VideoRam    1024
    Clocks  25.17  28.32  41.53  50.35
EndSection

Section "Monitor"
    Identifier "NEC MultiSync 4FGe"
    VendorName "NEC"
    ModelName "MultiSync 4FGe"
    BandWidth 80Mhz        #\
    HorizSync 27-62KHz      #> from monitor documentation
    VertRefresh 55-90Hz    #/
#    ModeLine "640x480"  31  640  680  704  832 480 489 492 520
#    ModeLine "800x600"  50  800  864  976 1040 600 637 643 666
#    ModeLine "1024x768" 81 1024 1068 1204 1324 768 776 782 807
ModeLine "640x480"      25     640  664  760  800    480  491  493  525
ModeLine "800x600"      40     800  840  968 1056    600  601  605  628  -hsync +vsync
ModeLine "1024x768i"    45    1024 1064 1224 1264    768  777  785  817  +hsync +vsync
ModeLine "1024x768"     75    1024 1048 1184 1328    768  771  777  806  -hsync +vsync
EndSection

2. LILO ingores me

3. NEED: Xconfig for Compaq QVision/1024 & Compaq 171FS monitor

4. sending output to xterm ...

5. Anyone has Xconfig for NEC 4FGe and ATI LX 2 meg DRAM?

6. help: Lynx with firewall

7. Xconfig for COMpaq QVISION Video Controller

8. Change route table on vpn

9. Xconfig for Compaq Qvision/1024

10. XConfig for QVISION 2000 (Compaq)

11. Xconfig for Compaq Qvision. ???

12. Compaq Qvision 1024 & NEC Multisync Plus

13. Xconfig for Compaq 66M w/ QVision graphics?