by Mohammed Kab » Tue, 17 May 1994 13:41:52
I have a AT&T INTELLIGENT PORTS CARD (IPC 802) that supports
8 serial and 2 parallel port. I have drivers for AT&T System V/386
ver 3.2 (rel 2.1). Is there anyway I can get it working with Linux?
Is there any generic driver that will work with the card? I want to
hook up 8 modems/terminals with it to my linux box. TIA
kabir.
by Greg Hanki » Wed, 18 May 1994 04:21:48
> I have a AT&T INTELLIGENT PORTS CARD (IPC 802) that supports
> 8 serial and 2 parallel port. I have drivers for AT&T System V/386
> ver 3.2 (rel 2.1). Is there anyway I can get it working with Linux?
> Is there any generic driver that will work with the card? I want to
> hook up 8 modems/terminals with it to my linux box. TIA
Greg
Georgia Institute of Technology | Computing and Networking Services
Atlanta, GA 30332-0280 | +1 404 853 9989
1. AT&T IPC-802 /IPC-900 Drivers for SCO?
I think this is the best solution (with the addition of SCO OpenServer
Release 5). They have replaced one AT&T box with a DEC Prioris HX590/SCO
OpenServer Release 5.
As for the IPC802 and IPC900, Digi doesn't claim either one. They did
OEM the IPC1600 but don't have SCO drivers. Oh well, AT&T DOES make
pretty good boat anchors .... (just a tad expensive though).
Thank you,
Lucky
Lucky Leavell Phone: (812) 945-6555
Relational Information Systems, Inc. FAX: (812) 949-9233
New Albany, IN 47150-2013 71534,2674 (CompuServe)
WWW Home Page: http://www.iglou.com/ris ftp://www.iglou.com/members/ris
3. AT&T IPC-1600 Intelligent Ports Card
4. ssh (or rather sftp) question
5. How do I get AT&T IPC 802 BOARD (8 serial 2 parallel) to work?
6. Reading is much more interesting than TV (0171/1708)
7. Getting RedHat9 to work with Linksys WPC54G (802.11g PCMCIA card)
8. looking for XView Reference Manual
9. CTC 30200A Gemini-10 or AT&T IPC-802 miltiport serial help needed
11. CTC 30200A Gemini-10 or AT&T IPC-802 miltiport serial help needed
12. 802.11a/b/g pcmcia card with support for 802.11h