by I just upgraded my Linux from using X11R5 to X11R6 and used the ConfigXF86
script to create the XF86Config, it did not work and has following error
message. Actually the values of this new XF86Config are the same as Xconfig
of my old X11R5 and it worked before. My system has the hardwares listed
(Orchid_Fahrenheit_1280_Plus-VLB and NEC-3D). Could somebody please tell
me what is wrong?
Thanks,
Po-Ting Wu
w...@cs.purdue.edu
======================== Message after startx ============================
XFree86 Version 3.1 / X Window System
(protocol Version 11, revision 0, vendor release 6000)
Operating System: Linux
Configured drivers:
S3: accelerated server for S3 graphics adaptors (Patchlevel 2)
mmio_928, s3_generic
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config Fatal server error: xinit: No such file or directory (errno 2): unexpected signal 13
================== The XF86Config your script generated ================= # Copyright (c) 1994 by The XFree86 Project, Inc. # This file was generated by reconfig(1) Section "Files" Section "ServerFlags" Section "Keyboard" Section "Pointer" Section "Monitor" Section "Device" Section "Screen"
(**) stands for supplied, (--) stands for probed/default values
(**) Mouse: type: mousesystems, device: /dev/mouse, baudrate: 1200
(**) S3: Graphics device ID: "RandomDevice-4"
(**) S3: Monitor ID: "RandomMonitor-4"
(--) S3: Mode "1056x792i" needs hsync freq of 35.60 kHz. Deleted.
(--) S3: Mode "1296x972" needs hsync freq of 40.02 kHz. Deleted.
(--) S3: Mode "496x372" needs hsync freq of 40.06 kHz. Deleted.
(--) S3: Mode "552x414" needs hsync freq of 40.23 kHz. Deleted.
(--) S3: Mode "640x480" needs hsync freq of 31.25 kHz. Deleted.
(--) S3: Mode "640x500" needs hsync freq of 40.00 kHz. Deleted.
(--) S3: Mode "704x528" needs hsync freq of 31.53 kHz. Deleted.
(--) S3: Mode "712x534" needs hsync freq of 40.18 kHz. Deleted.
(--) S3: Mode "728x534" needs hsync freq of 31.53 kHz. Deleted.
(--) S3: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted.
(--) S3: Mode "800x600" needs hsync freq of 40.00 kHz. Deleted.
(--) S3: Mode "800x600" needs hsync freq of 45.09 kHz. Deleted.
(--) S3: Mode "840x640" needs hsync freq of 43.35 kHz. Deleted.
(--) S3: Mode "896x672" needs hsync freq of 40.18 kHz. Deleted.
(--) S3: Mode "992x744" needs hsync freq of 40.06 kHz. Deleted.
(**) FontPath set to "/usr/X11R6/lib/fonts/misc/,/usr/X11R6/lib/fonts/Type1/,/usr/X11R6/lib/font
(--) S3: card type: 386/486 localbus
(--) S3: chipset: 805, rev A or B
(--) S3: chipset driver: s3_generic
(--) S3: videoram: 1024k
(--) S3: Ramdac type: normal
(--) S3: Ramdac speed: 110
(**) S3: clocks: 25.20 28.32 40.00 0.00 50.10 77.00 36.20 44.90
(**) S3: clocks: 130.00 120.00 80.00 31.50 110.20 65.00 75.00 94.60
(--) S3: Maximum allowed dot-clock: 110.000 MHz
(--) S3: There is no mode definition named "1056x792i"
(--) S3: Removing mode "1056x792i" from list of valid modes.
(--) S3: There is no mode definition named "1296x972"
(--) S3: Removing mode "1296x972" from list of valid modes.
(--) S3: There is no mode definition named "496x372"
(--) S3: Removing mode "496x372" from list of valid modes.
(--) S3: There is no mode definition named "552x414"
(--) S3: Removing mode "552x414" from list of valid modes.
(--) S3: There is no mode definition named "640x480"
(--) S3: Removing mode "640x480" from list of valid modes.
(--) S3: There is no mode definition named "640x500"
(--) S3: Removing mode "640x500" from list of valid modes.
(--) S3: There is no mode definition named "704x528"
(--) S3: Removing mode "704x528" from list of valid modes.
(--) S3: There is no mode definition named "712x534"
(--) S3: Removing mode "712x534" from list of valid modes.
(--) S3: There is no mode definition named "728x534"
(--) S3: Removing mode "728x534" from list of valid modes.
(--) S3: There is no mode definition named "800x600"
(--) S3: Removing mode "800x600" from list of valid modes.
(--) S3: There is no mode definition named "800x600"
(--) S3: Removing mode "800x600" from list of valid modes.
(--) S3: There is no mode definition named "800x600"
(--) S3: Removing mode "800x600" from list of valid modes.
(--) S3: There is no mode definition named "840x640"
(--) S3: Removing mode "840x640" from list of valid modes.
(--) S3: There is no mode definition named "896x672"
(--) S3: Removing mode "896x672" from list of valid modes.
(--) S3: There is no mode definition named "992x744"
No valid modes found.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# Refer to the XF86Config(4/5) man page for a description of the format
FontPath "/usr/X11R6/lib/fonts/misc/"
FontPath "/usr/X11R6/lib/fonts/Type1/"
FontPath "/usr/X11R6/lib/fonts/Speedo/"
FontPath "/usr/X11R6/lib/fonts/75dpi/"
FontPath "/usr/X11R6/lib/fonts/100dpi/"
RGBPath "/usr/X11R6/lib/X11/rgb"
EndSection
EndSection
Protocol "Standard"
ServerNumLock
EndSection
Protocol "mousesystems"
Device "/dev/mouse"
BaudRate 1200
EndSection
Identifier "RandomMonitor-4"
VendorName "Unknown"
ModelName "Unknown"
BandWidth 25.2 # EDIT THIS!
HorizSync 31.5 # EDIT THIS!
VertRefresh 60 # EDIT THIS!
ModeLine "1056x792i" 45 1056 1072 1224 1264 792 785 785 817 interlace
ModeLine "1296x972" 65 1296 1448 1496 1624 972 972 972 1020
ModeLine "496x372" 25 496 568 576 624 372 372 378 390
ModeLine "552x414" 28 552 632 640 696 414 414 420 434
ModeLine "640x480" 25 640 664 760 800 480 491 493 525
ModeLine "640x500" 32 640 728 768 800 500 506 492 533
ModeLine "704x528" 28 704 744 848 888 528 534 536 554
ModeLine "712x534" 36 712 808 824 896 534 534 535 560
ModeLine "728x534" 28 728 752 856 888 534 534 536 554
ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
ModeLine "800x600" 40 800 904 920 1000 600 600 601 630
ModeLine "800x600" 45 800 912 974 998 600 600 609 631
ModeLine "840x640" 45 840 936 942 1038 640 624 625 639
ModeLine "896x672" 45 896 1008 1032 1120 672 672 674 705
ModeLine "992x744" 50 992 1112 1152 1248 744 744 746 781
EndSection
Identifier "RandomDevice-4"
VendorName "Unknown"
BoardName "Unknown"
Clocks 25.2 28.32 40 0 50.1 77.0 36.2 44.9 130.0 120.0 80.0 31.5 110.2 65.0 75.0 94.6
EndSection
Driver "accel"
Device "RandomDevice-4"
Monitor "RandomMonitor-4"
Subsection "Display"
Modes "1056x792i" "1296x972" "496x372" "552x414" "640x480" "640x500" "704x528" "712x534" "728x534" "800x600" "800x600" "800x600" "840x640" "896x672" "992x744"
Virtual 1024 768
EndSubsection
EndSection