ZG v2.3 not working -help

ZG v2.3 not working -help

Post by Sam Sal » Sun, 30 Oct 1994 10:26:04

Has anyone managed to get Zgv v2.3 to work without a math-copro?
It compiles great in my linux box, and I even get the menus where you select
the files to be shown, but when I press enter, it says : Floating point
expection or division by zero.

I can't really figure out what the problem is.


1. V2.2.0 & V2.2.2 kernel do not compile on a m68k Amiga A1200

 I have tried to compile linux kernal v2_2_0 and v2_2_2 and get a
compilation error.
 My system is an Amiga A1200 with a Blizzard 1260 and SCSI interface.
 48Mb Ram and approx 5.5Gb of disk space on the SCSI port and .5Gb on
 the IDE port.
 A CDROM and a HP T4000s tape streamer are also on the SCSI port.

 I am running 2_0_36 at present and I would like to upgrade as I am
having trouble getting linux to boot when I have a Zip drive connected
 to the SCSI port.

 On typing make I get the following output.
 Has anyone tried to compile this before and if so how did you
overcome this error.

 Thank you.


  gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes
 -O2 -fomit-frame-pointer -pipe -fno-strength-reduce -ffixed-a2
  -c -o init/main.o init/main.c

 /usr/src/linux/include/asm/semaphore.h: In function
 In file included from /usr/src/linux/include/linux/fs.h:161,
                  from /usr/src/linux/include/linux/capability.h:13,
                  from /usr/src/linux/include/linux/binfmts.h:5,
                  from /usr/src/linux/include/linux/sched.h:8,
                  from /usr/src/linux/include/linux/mm.h:4,
                  from /usr/src/linux/include/linux/slab.h:14,
                  from /usr/src/linux/include/linux/malloc.h:4,
                  from /usr/src/linux/include/linux/proc_fs.h:5,
                  from init/main.c:15:
 /usr/src/linux/include/asm/semaphore.h:61: `owner_depth' undeclared
 (first use this function)
 /usr/src/linux/include/asm/semaphore.h:61: (Each undeclared
 is reported only once
 /usr/src/linux/include/asm/semaphore.h:61: for each function it
appears in.)
 make: *** [init/main.o] Error 1

2. X 4.0.1 Very Slow

3. VisionFS 92 v2.0 from v1.2 now not working

4. Digi DSCREEN & SCO Unix

5. Keyboard not working in R5 V2

6. couldn't set locale correctly...why??

7. linksys LNE100tx v2.0 nics with FreeBSD 4.2 release not working

8. IP Masquerading & FTP

9. VisionFS 92 v2.0 from v1.2 now not working

10. IRIX NFS downgraded to v2, NIS client not working after reboot

11. startx does not in v2.0,works fine in pre2.0.7

12. VoiceSURFR 56K modem & Solaris v2.6 x86 Not Working???

13. Help getting MA111 v2 with sis 162 chipset working under Linux?!