1. Lilo won't load os/2, os/2 won't load lilo
I'm having some problems getting OS/2 Warp, Dos/Windoze, and Linux to
cohabitate on the same machine.
When I set up lilo with another os (being os/2) I can boot from the drive
where the os/2 boot manager is, and it does indeed load an operating system
that isn't linux, but its not os/2 either. It loads dos. The drive
structure is such:
1'st IDE drive: WD 540 meg, formatted ext2fs, linux, lilo on MBR
2'nd IDE drive: WD 540 meg, 1'st partiton 1 meg with os/2 boot manager, 2'nd
partition is DOS/Windoze, formatted FAT
3'rd IDE drive: WD 340 meg, formatted hpfs, os/2 warp, no boot manager
Linux: Slackware 2.0, patched kernel to 1.1.38 (where the drives
actualy work for the first time with no BIOS adjustments!)
Other Problem
causing toys: Mitsumi CDROM, Colorado 250MB tape (I stopped posting about
that one long ago :(, 2 floppies, Soundblaster 16 compatible
sound card, SMC Elite combo ethernet card (8013EC or ~)
So LILO seems to skip right over the partition with os/2's boot manager and
loads up DOS. Despite the fact that i specified in my lilo.conf for the
os/2_db (spelling) loader to use /dev/hdb1, and that dos is on hdb2.
I've tried putting the other 540 meg drive first, and using OS/2's boot
manager to load everything. But the fdisk setup program for os/2's boot
manager refuses to believe that there is an operting system on the linux
drive, and it won't let me set up a boot manager option to load it. :(
I've also tried a utility I picked up from a sunsite cd; setboot. This is
supposed to pick a boot manager to use on reboot from among different drives
and partition. It can't seem to find ANY boot managers though, not even the
one that LInux is using! (damn thing)
On a side note I can't get LInux to read my third drive. I used the
MAKEDEV script to build the device drivers for the third drive (hd1a)
but Linux just gives that annoying useless drive busy, wrong fs type, or
some other error when I try to access it from anything like mount or fdisk.
This seems to hold true whether the third drive is the DOS drive or the HPFS
one. DOS/WINDOZE/OS/2 can all see this drive fine though....
Perhaps this is a problem with Enhanced IDE controllers on PCI buses?
Well, I'll stop here. :)
If I can get all that to work, I'll be a very happy camper for a few days
until I start tinkering with other stuff. I seem to enjoy setting up
odd things much more than I do using them anyhow. ;>
-Steve Rojem
2. 'hostname' under Redhat 3.0.3 (can't find FQDN)
3. LILO: Won't load off floppy!!
4. Need lintk.so.4
5. gpm won't load under ramdisk
6. Lost root password on Solaris HELP!!!!!
7. 'make xconfig' problem of pre2.0.14
8. Looking for a Cheap Sun Netra web databe
9. Latest 'Stable' v2.0.xx release past v2.0.14?
10. LILO 0.14 problems
11. Lilo 0.14 problems
12. Lilo 0.14 install problem
13. LILO 0.14 released
by