Xconfig Spea V7-Mirage P-64 Help!!!

Xconfig Spea V7-Mirage P-64 Help!!!

Post by Kai Frits » Tue, 18 Oct 1994 19:42:37




Quote:

>   --
>   XFree86 Version 2.1.1 / X Window System
>   (protocol Version 11, revision 0, vendor release 5000)
>   Operating System: Linux
>   Configured drivers:
>     S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
>     mmio_928, s3_generic
>   (using VT number 7)

>   (--) S3: Unknown S3 chipset: chip_id = 0xc0

>    *** None of the configured devices was detected.***

Hi,

use XFree86-3.1 ...

        Kai.

--
========================================================================
Kai Fritsch                     Network Management Group

Computing Center                Voice : ++49-0621-2921434

L15,16
========================================================================

 
 
 

Xconfig Spea V7-Mirage P-64 Help!!!

Post by Norbert Distl » Tue, 18 Oct 1994 17:41:49



>Hi guys!
>Right now I've installed Slakware 2.01 on my PC (486DX2-66,ASUS SP3G,
>NCR 53c810). I tried to create a Xconfig file with ConfigXF86
>(62 SPEA Mirage V7 2MB, 1 VESA-Generic Modes) on no success.
>When I start X it aborts with the following message:

...

You should use XFree86 3.1 that supports your MirageP64, but you have
to read README.S3 to see how to make it work.

    Norbert

PS: Could you send me an email about the problems/success with your card.

--
-------------------------------------------------------------------------


 
 
 

Xconfig Spea V7-Mirage P-64 Help!!!

Post by Jens Elkn » Tue, 18 Oct 1994 11:12:50


Hi guys!

Right now I've installed Slakware 2.01 on my PC (486DX2-66,ASUS SP3G,
NCR 53c810). I tried to create a Xconfig file with ConfigXF86
(62 SPEA Mirage V7 2MB, 1 VESA-Generic Modes) on no success.
When I start X it aborts with the following message:

--
XFree86 Version 2.1.1 / X Window System
(protocol Version 11, revision 0, vendor release 5000)
Operating System: Linux
Configured drivers:
  S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
      mmio_928, s3_generic
(using VT number 7)

(--) S3: Unknown S3 chipset: chip_id = 0xc0

 *** None of the configured devices was detected.***

Fatal server error:
no screens found
xinit:  No such file or directory (errno 2):  unexpected signal 13
---

Does anybody know what I can do about that or is that an Xserver
problem in generally.

Thanx in advance,
Jens.

 
 
 

Xconfig Spea V7-Mirage P-64 Help!!!

Post by Daniel Pullwi » Fri, 21 Oct 1994 18:07:20



=>
=> Right now I've installed Slakware 2.01 on my PC (486DX2-66,ASUS SP3G,
=> NCR 53c810). I tried to create a Xconfig file with ConfigXF86
=> (62 SPEA Mirage V7 2MB, 1 VESA-Generic Modes) on no success.
=> When I start X it aborts with the following message:

=>
=> (--) S3: Unknown S3 chipset: chip_id = 0xc0
=>
XFree86-2.1 doesn't support the S3-Vision864 chipset. You have to upgrade to
XFree 3.1 which supports the SPEA V7 Mirage P-64 (i haven't tested this yet)

Daniel

 
 
 

1. Xconfig Spea Mirage V7 P-64 help !!!

Hi guys!

Right now I've installed Slakware 2.01 on my PC (486DX2-66,ASUS SP3G,
NCR 53c810). I tried to create a Xconfig file with ConfigXF86
(62 SPEA Mirage V7 2MB, 1 VESA-Generic Modes) on no success.
When I start X it aborts with the following message:

--
XFree86 Version 2.1.1 / X Window System
(protocol Version 11, revision 0, vendor release 5000)
Operating System: Linux
Configured drivers:
  S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
      mmio_928, s3_generic
(using VT number 7)

(--) S3: Unknown S3 chipset: chip_id = 0xc0

 *** None of the configured devices was detected.***

Fatal server error:
no screens found
xinit:  No such file or directory (errno 2):  unexpected signal 13
---

Does anybody know what I can do about that or is that an Xserver
problem in generally.

Thanx in advance,
Jens.

2. ksh script

3. Spea V7-Mirage P-64 PROBLEMS!!!!!

4. /etc/printcap entry needed for Printronix P-300 printer

5. Spea V7 Mirage P-64 (S3-864) and HS MS 1564LE Monitor

6. I Need the Patch for ATI Video

7. Metro-X and SPEA V7 Mirage P-64

8. XView

9. Spea V7 Mirage P-64 PCI

10. Help: Xconfig for Spea Mirage V7 S3 801

11. HELP: Xconfig for SONY sf15/Spea Mirage 64

12. SPEA V7 Mirage (VLB) CTX 1760LR XConfig

13. Spea V7-Mirage 2MB