Board index Linux Help

No Sound (Sndscape Vivo; Mandrake 6.0)

No Sound (Sndscape Vivo; Mandrake 6.0)

Post by Tim Fris » Fri, 30 Jul 1999 04:00:00



I currently have a Ensoniq Soundscape Vivo 90 PnP sound card running
fine under Win95.  When I use sndconfig under Linux-Mandrake 6.0, the
autoprobe does not recognize the sound card.  So, I manually configure
the DMA's and IRQ's for the card using the same settings as those in
Win95.  Still no sound.  

Any suggestions?

Win95 settings:
Class: Sound, video and game controllers
Device: ENSONIQ SoundscapeVIVO Plug and Play
Resources:
        IRQ: 05
        IRQ: 09
        I/O: 0330h-033Fh
        I/O: 0530h-537h
        I/O: 2100h-213Fh
        DMA: 01
        DMA: 03

sndconfig settings:
I/O Port: 0x530 (I tried 534, but I got device conflict message)
IRQ: 5
DMA 1: 1
DMA 2: 3
MPU I/O: 0x330
MPU IRQ: 9

Thanks.
--

----------------------------------------------
"Why, fer cryin' out loud, research physicists
need Porsches too!" -- Opus (Bloom County)

 
 
 
Top

No Sound (Sndscape Vivo; Mandrake 6.0)

Post by Greg Taryn and The Kittie » Sat, 31 Jul 1999 04:00:00



> I currently have a Ensoniq Soundscape Vivo 90 PnP sound card running
> fine under Win95.  When I use sndconfig under Linux-Mandrake 6.0, the
> autoprobe does not recognize the sound card.  So, I manually configure
> the DMA's and IRQ's for the card using the same settings as those in
> Win95.  Still no sound.

> Any suggestions?

> Win95 settings:
> Class: Sound, video and game controllers
> Device: ENSONIQ SoundscapeVIVO Plug and Play
> Resources:
>         IRQ: 05
>         IRQ: 09
>         I/O: 0330h-033Fh
>         I/O: 0530h-537h
>         I/O: 2100h-213Fh
>         DMA: 01
>         DMA: 03

> sndconfig settings:
> I/O Port: 0x530 (I tried 534, but I got device conflict message)
> IRQ: 5
> DMA 1: 1
> DMA 2: 3
> MPU I/O: 0x330
> MPU IRQ: 9

> Thanks.
> --

> ----------------------------------------------
> "Why, fer cryin' out loud, research physicists
> need Porsches too!" -- Opus (Bloom County)

Does the BIOS have the option to turn off PnP?
Ihad to do that in order to get my sound card to work...
--
Use the Open Source, Luke.
http://members.dencity.com/gafntaf/
AIM:psyk0tron ICQ:14232895

 
 
 
Top

1. Linux Rehat 6.0 ( Mandrake ) New Install - No Sound from Sound Blaster 16 - SCSI

I just installed Linux Mandrake 6.0 (Redhat) on my Pentium II 333 but I
cannoot get any sound out of my Sound Blaster 16 - SCSI (ISA) Sound Card. I
thought this (older) soundblaster would work with minimal fuss, bit I get
nothing. And I am a Linux Newbie so I am not sure how to go in and check and
fix the problem. Any suggestions as to how I should proceed ? I'm not even
sure where to look for the sound driver settings.


2. X11 SVGA HELP ME!!

3. Sound Blaster PCI128 Sound Card with Mandrake 6.0

4. AAUUGGHH! X server refusing clients!

5. mandrake 6.0 sound conf

6. voip on private lan

7. Pci128 Sound and Mandrake 6.0 problem

8. Can IP_MASQUERADE work with TIA?

9. CS4280 Sound Chip-Linux-Mandrake 6.0

10. Sound Card screwed up Modem in Mandrake 6.0

11. Adding Fonts to X in Red Hat 6.0 / Mandrake 6.0

12. RH 6.0 and Mandrake 6.0

13. RH 6.0 vs. Mandrake 6.0


All times are UTC
Board index