Ide kernel & parallel printing

Ide kernel & parallel printing

Post by C.J. DE RUITER » Tue, 29 Mar 1994 23:11:22



How do I enable parallel printing in the Ide Kernel?
I use Slackware 1.2.0 and it tel's me there are a lot things but there is no
parallel port available.
Strainge I do have one.
Chris
 
 
 

Ide kernel & parallel printing

Post by Mark Lo » Wed, 30 Mar 1994 00:53:37



>How do I enable parallel printing in the Ide Kernel?

??

What happens when you cat a file into /dev/lp1 ?

Try this:    cat /etc/profile >/dev/lp1
--


 
 
 

1. The SCSI kernel in Slackware 1.2.0 gives parallel printing

If you want parallel printing and networking ready to go (even if you
have no SCSI devices) install the scsikernel.  Especially as recompiling
and reconfiguring gives problems in setting up the networking if you
have installed the non-scsi kernel.  It took me about 4 hours to find
this out! Don

--
Donald F. Parsons MD, Wadsworth Ctr. Rm C273, NY State Dept of Health, ESP,
PO Box 509, Albany, NY 12201-0509. (518)474-7047 Fax: (518)474-7992


2. Idle Load Averages in 2.1

3. What happened to parallel port printing in 2.1.4x kernels

4. How to activate a SP Switch

5. What is the effect on the kernel when printing( orUSB vs Parallel)

6. mySQL

7. Which kernel version for VFAT filesys and printer & zip drive support on same parallel port?

8. i815 Card ...Machine Freezes

9. Red Hat 6.0 && init messages && new kernel

10. O(1) & preempt & XFS & new IDE for 2.4.19

11. &&&&----Looking for a unix shell------&&&&&

12. ide-scsi CD-R Problem With Newest Kernels (.14 & .15) - write_g1?!?!?!?

13. via ide udma & ibm hd freezes kernel