by J.BOLLIET-L.S.NGUY » Fri, 04 Nov 1994 22:40:41
I'VE PURCHASED A SLACKWARE LINUX VERSION AND WOULD LIKE TO USE MY NEC CDR 210 BUT
WHEN I USE THE AHA152X DRIVER THE SYSTEM ONLY HANG ON WHEN DECTECTING THE CDROM
I READ IN THE DOCS THAT THE CDR 210 DID'NT SUPPORT THE TRANSMISSIONS WITH PARITY
CHECKING AND I'D LIKE TO KNOW WHAT CAN I DO TO REMOVE THE PARITY BIT OR WHERE TO
FIND A KERNEL SUPPORTING MY CDROM
THANX A LOT.
1. Adaptec 1522 & NEC CDR-210 working under Linux?
As the subject says, are the AHA1522 and NEC 2x CDR-210 working together
under Linux?
They work fine under DOS with parity and syncronous operation disabled.
However, Linux just hangs at boot up when it gets to checking the CD-ROM
drive. I've been using the AHA1522 with a SCSI hard disk with no
problems for about 9 months.
At boot time, after it checks the hard disk, it tries to check the CD-ROM
and it hangs. Also, the SCSI messages in Linux tell me that the parity is
enabled even though I disabled it on the card. The NEC CDR-210 doesn't
support parity. Is that the problem? If so, how do I tell Linux that I
want the parity disabled? And yes, I did recompile the kernel with SCSI
CD-ROM option enabled.
If you use these 2 together would you please tell me your setup.
Thanks in advance!
Regards,
Larry
2. UNIX c shell script problem!!!!!!!!!!!!!!!!!!!!!!!
3. AHA1522 & NEC CDR:210 = lost chars ?
4. Strange problem with sendmail server
5. Adaptec 1505 SCSI adapter and NEC CDR-210
7. NEC CDR-210 SCSI CDrom problem
9. NEC SCSI CD-ROM drive CDR-210 rev. 1.0 is not recognized
10. Adaptec 1505 SCSI adapter and NEC CDR-210
12. NEC CDR-210 SCSI CDROM Problems