Portforward with RH72

Portforward with RH72

Post by Johan Mure » Thu, 13 Dec 2001 20:18:22

I have a problem
My situation
I had a RH62 and using ipmasqadm to forward port 8080 from my firwall
maskin to port 8080 on a computer on 192.168.1.xx

Is there any way to do this on RH72???

let say is th IP on eth1
and id the ip on eth0
and I want to forward port 8080 to a IP

Can I do this with iptables ???



1. portforward/VirtualHost problem


I have Apache 1.3.14/Linux 2.2.17 set up to run three virtual hosts on one
ip and ports 80, 8080 and 8081 respectively. If I connect directly to the
individual ports I get the correct virtual hosts. However, if I configure
port forwarding:

  ipchains -s x/y --destination-port 80 -j REDIRECT 8081

the response is actually what I would have gotten for

  lynx localhost:8080

(And yes, I checked that the redirection is set correctly. If apache is
not listening on 8081 or I redirect to 8082 I get nothing). Any hints why
this would be?



2. Where is the documentation for assembler as86

3. old-style portforward with iptables?

4. Where do I get the C runtime library xlC.rte

5. Ipchains Portforward Problem

6. kld problem

7. xinetd with vpn portforward woes..

8. Is FreeBSD's Linux emulation any good ?

9. ipchains/portforward/citrix...bin planlos, hilfe

10. netfilter: establish portforward/DNAT while request-attempt

11. NAT and IPTABLES / PORTFORWARD questions...

12. Boot RH72 with adaptec 1520 will not work

13. RH72 install fails on disk over 1TB (hardware raid)