NexStor PCI SCSI controller supported?

NexStor PCI SCSI controller supported?

Post by Steve Hurlb » Sun, 24 Apr 1994 23:44:42



I am trying to help a friend install Linux. His hard disk
is attached to a NexStor Nxt-93 SCSI controller (PCI bus).
I didn't see this controller in the SCSI-HOWTO file.

When Linux is booted from the install floppy, no SCSI
disks are detected.

Is this controller supported by Linux?

-Steve

 
 
 

NexStor PCI SCSI controller supported?

Post by Michael Wi » Wed, 27 Apr 1994 05:20:53



Quote:>I am trying to help a friend install Linux. His hard disk
>is attached to a NexStor Nxt-93 SCSI controller (PCI bus).
>I didn't see this controller in the SCSI-HOWTO file.
>When Linux is booted from the install floppy, no SCSI
>disks are detected.
>Is this controller supported by Linux?

Probably not. I do not know of any PCI-scsi-controller working yet.
Drew is working on the onboard-NCR53c810-driver, but this may take some
more time...

According to Drew, Scott Ferris is working on the AIC-7770 driver under Linux,
but I have no confirmation on this yet.

Up to now you either have to use PCI-IDE or one of the ISA-SCSI-Controllers
like me using the Adaptec-1542B-ISA in an isa-slot. It is not *that* slow,
but will be a lot faster as soon as the NCR-driver is out :-)

see sunsite.unc.edu:/pub/Linux/docs/HOWTO/PCI-HOWTO for more information.

Cheers, Michael Will

 
 
 

1. NexStor PCI SCSI controller problems with RedHat

I am having some installation problems with Red Hat.

Upon booting, the SCSI driver goes into an infinite loop.
Prior to that, I get some error message like:

.. aborting due to timeout
..  DANGER: command in running list cannot abort...

Then it starts spewing out the same message over and over again:

.. scsi0: existing issue queue

The SCSI controller card is a PCI controller based around the
NCR 53c810 chip.

My machine is:

Mircon P60

Conner CFP2107S at scsi ID0
Maxtor MXT-540SL at scsi ID 1
Chinon CDS-535 cdrom at scsi ID 6

I have booted with image #36.

I know the controller etc are OK, because they work fine
under windows NT and windows 95.

BTW I have the same problem under Slackware Linux v 2.0

Anyone know what might be going on?

thanks.

--
+-------------------------------------------------+-------------------------+

| USMail : 3325 Triana Blvd, Huntsville, AL 35805 |       /\                |
| Phone  : (205) 536-6576                         |     _=\ >               |
| Fax    : (205) 536-6590                         |    (*)/ (*)             |
+-------------------------------------------------+-------------------------+

2. stop execution of a script if user is logged in from remote server

3. Support for NexStor NXT-92/93 SCSI controller

4. Linking

5. NexStor VL-Bus SCSI Controller

6. Wordperfect

7. NexStor (NXT-92) PCI SCSI card not working?

8. ** Linux and Pilot **

9. Does Linux support NEXSTOR PCS/SCSI

10. Is there support for Western Digital PCI SCSI Controllers yet?

11. Support for Tekram DC-390F PCI SCSI controller?

12. Qlogic PCI SCSI controller support status ??

13. Initio U2W PCI SCSI Controller Tech-support correspndence.Very Dissapointing!!!