Very Computer

Hello All,
Problem with Xwindows installation.

I have tried all of these. And when I start my X. I get the following.
Hope
 this helps you to help me.
 root> startx
 The error message is as follows:
 (---SVGA): mode "1024x768" needs hysn freg of 80.21khtz deleted
(---SVGA):
 mode "1280x1024" needs hysn freq of 81.73 khtz deleted .
 .
 .
 .
 (---SVGA): mode "1800x1440" needs hsync freq of 104.52 khrtz deleted

 (**) Fontpath set to "/usr/X11R6/lib/x11/fonts/local/,...." (--)SVGA:
PCI

 (--SVGA): unable to open /dev/agpgart : No such device.

 Fatal server error:
 Aborting.

 Please help me to fix this problem, so that I run xwindows on my linux
 system.

 Regards
 Ramkumar V

 Display
 Chipset
 Intel 810 Chipset Graphics adapter

 Memory Type
 Uses System Memory PC100 SDRAM

 Memory Size
 Memory allocated by system as needed from 1 - 8MB

 Bus
 AGP

 Resolution at Maximum Color Depth
 1024x768/16.7 Million colors

 Color Depth at Maximum Resolution
 256 colors/1600x1200

 Maximum Scan Rate/Resolution 96 Hz/1600x1200

Sent via Deja.com http://www.deja.com/
Before you buy.

On Thu, 20 Jul 2000 16:13:17 GMT,

+ Hello All,
+ Problem with Xwindows installation.

+  (--SVGA): unable to open /dev/agpgart : No such device.

+  Please help me to fix this problem, so that I run xwindows on my linux
+  system.

Go to the Intel website
<url:http://support.intel.com/support/graphics/intel810/linuxsoftware.htm>
and get the agpgart kernel module. You'll have to compile it against
your version of the kernel (IIRC).

You may also want to look at:
<url:http://support.intel.com/support/graphics/intel810/howto.htm>

James
--
Consulting Minister for Consultants, DNRC
The Bill of Rights is paid in Responsibilities - Jean McGuire
To cure your perl CGI problems, please look at:
<url:http://www.perl.com/CPAN/doc/FAQs/cgi/idiots-guide.html>